146
Wireless LAN
Open the Intel
®
PROSet/Wireless Software using either of the following procedures:
z Double-click the
icon, the
icon or the icon on the notification area to check
the communication status
z Click [start] - [All Programs] - [Intel PROSet Wireless] - [Intel PROSet Wireless]
For more information about how to use the Intel
®
PROSet/Wireless Software, refer to [Help]
in the menu bar.
z Click the icon or the icon on the notification area to check whether
IEEE802.11a is enabled or disabled.
When [Disable 802.11a] is displayed: 802.11a is enabled. (802.11a is on).
When [Enable 802.11a] is displayed: 802.11a is disabled. (802.11a is off).
If the setting has been changed at [Device Manager], the wireless LAN standard will be
changed.
Check the Wireless LAN Communication Status
To Next Page
Loading...
