Panasonic CQ-C5400N

CQ-C5400NCQ-C5400N
1 23 4 5 6123 456
BAND
29
28
E
N
G
L
I
S
H
CQ-C5400/C5300/C5100N
28
27
E
N
G
L
I
S
H
CQ-C5400/C5300/C5100N
Balance/Fader
You can adjust the sound level among the right, left, front and
rear speakers.
Default: BAL (balance) CNT (centre)
FAD (fader) CNT (centre)
Setting range: 15 levels each
Press [VOLUME] (SEL: select).
Press [VOLUME] (SEL: select).
Turn [VOLUME].
q : Front enhanced
w : Rear enhanced
Turn [VOLUME].
q : Right enhanced
w : Left enhanced
Turn [VOLUME].
q : Increased
w : Decreased
Turn [VOLUME].
q : Increased
w : Decreased
Turn [VOLUME].
q : Up
w : Down
Subwoofer LPF (Low Pass Filter)
Select the upper limit frequency of the sound from subwoofer.
Default: 80 Hz
Setting range: 80 Hz/120 Hz/160 Hz
Press [VOLUME] (SEL: select).
Press [VOLUME] (SEL: select).
Subwoofer LEVEL
You can change the subwoofer volume level.
Default: 0
Setting range: MUTE (–∞), – 6 dB to + 6 dB (in 2 dB step)
Press [VOLUME] (SEL: select).
HPF (High Pass Filter)
Select the lower limit frequency of the sound from speakers
(except subwoofer).
Default: OFF
Setting range: OFF/90 Hz/135 Hz/180 Hz/225 Hz
Note:
¡ Press [DISP] to return to the regular mode.
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume
setting, 10 seconds in the SQ), the display returns to regular mode.
[DISP]
(Return to regular mode)
Press [VOLUME]
(SEL: select).
Audio Setting
(continued)
Turn [VOLUME].
[]][[]
VOLUME BASS
SUBW LPF SUBW LEV
FADER
SQ SET
HPF
Regular mode TREBLE
BALANCE