35
1
E
N
G
L
I
S
H
CQ-C5400/C5300/C5100N
34
33
E
N
G
L
I
S
H
CQ-C5400/C5300/C5100N
34
ACC ON
¡The power is turned on when a disc or magazine is inserted
while the power is off.
¡The Clock Time can be displayed while power is off.
¡When the ignition key is turned to OFF, the security mes-
sage is shown and the panel removal alarm sounds (at
Security Function ON setting).
ACC OFF
¡ When power is turned off, the security message is shown
and the panel removal alarm sounds (at Security Function
ON setting).
Note:
¡ Press [DISP] to return to the regular mode.
¡ If no operation takes place for more than 10 seconds in function setting, the display returns to
regular mode.
¡ The [MENU] button is not operative when “NO DISC” is displayed in the CD mode.
Press [SET].
Set to ON if your car
has ACC position.
Set to OFF if your car
has no ACC position.
Function Setting
(continued)
ACC Selection
Default: OFF
Press [MENU].
Caution:
¡Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure
to do this could cause the battery to go
dead.
[DISP]
(Return to regular mode)
Security Function
Allows you to activate the anti-theft function when leaving your
car.
Default: ON
Press [MENU].
When the power of this unit is turned OFF...
When the key in the ignition is turned OFF...
¡ Security message will be displayed.
¡ The panel removal alarm will be active.
(a Page 36)
When the front panel is removed...
¡ The security indicator blinks. (a Page 36)
To Next Page
Loading...
