CQ-C8401W/C7401W
Radio
English
1918
Radio
CQ-C8401W/C7401W
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).
Notes:
¡ Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡ You can switch between 6 and 18 for FM presetting
stations. (a page 19)
¡ Preset stations are changeable. (a page 19)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
Manual station preset
1
Tune in to a station.
2
Hold down [}] or [{] for 2 sec. or
more.
3
Select a preset number by pressing [}]
or [{].
4
Preset the station by holding down [}]
or [{] for 2 sec. or more.
Frequency/preset number blinks once.
Notes:
¡ New stations overwrite existing saved stations.
¡ In step 2, a station can be registered by holding down
the numeric button [1] to [6] for 2 sec. or more.
¡ To stop presetting stations, press [DISP].
Station Preset
(APM: AUTO PRESET MEMORY, P·SET: PRESET)
Mono/Local Setting (Radio Menu Display)
(AUTO PRESET/PRESET EDIT)
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [}] or [{] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
AUTO PRESET
You can select 6 or 18 stations for FM presetting with the
use of APM.
:
Presets 6 stations with good reception to the selected
band from FM1-FM3. This function is useful for
presetting stations in different areas in different bands.
(default)
:
Presets 6 stations to FM1-FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations.
PRESET EDIT
You can arrange the order of the preset stations. Preset
stations can be reordered as you like after executing APM
or the like.
1
Press [}] or [{] to select one station
to be interchanged.
2
Press [BAND] to confirm your selection.
3
Press [}] or [{] to select the other
station to be interchanged.
4
Press [BAND] to confirm your selection.
Direct Memory
(D·M: DIRECT MEMORY)
You can assign your favorite broadcasting station to the
[D·M] button. As the result of doing that, your favorite
broadcasting station can be received even if the CD mode
or the CD changer mode is activated. (Default: FM 87.50
MHz)
Note: For the use of an FM transmitter, it is useful for
users to register applicable frequencies on D·M.
D•M station calling
1
Press [D·M: DIRECT MEMORY].
D•M station writing
1
Select a station you would like to preset.
2
Hold down [D·M: DIRECT MEMORY]
for 2 sec. or more.
Lights when the D·M mode is activated.
To Next Page
Loading...
