10
9
E
N
G
L
I
S
H
CQ-D1703W
General (Main Unit)
Power
Set your car's ignition switch to the ACC or ON position.
ON: Press [SRC/PWR].
OFF: Press and hold [SRC/PWR] for more than 1 sec-
ond.
Clock Display (at Power Off)
When the power of the unit is set to OFF, press [DISP]
(CLOCK)
.
(Clock time) (Default)
(Display off)
When the power is set to ON, refer to the description for
each source mode.
Volume
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one vol-
ume setting for all FMs)
Mute
ON : Press [MUTE].
OFF : Press [MUTE] again.
indicator
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music
type.
Press
[SQ] to select the sound type as follows:
Note:
¡ If no operation takes place for more than 5 seconds in
the SQ mode, the display returns to the regular mode.
¡ Settings of SQ, bass/treble and volume are influenced
one another. If such an influence causes distortion to
the audio signal, readjust bass/treble or volume.
(
a Page 28)
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(FLAT) flat frequency response:
does not emphasize any part. (Default)
To Next Page
Loading...
