CQ-DP383U CQ-DP383U
E
N
G
L
I
S
H
18
33
E
N
G
L
I
S
H
17
32
Audio Settings
Note:
≥ Press [DISP] (display) to return to the
regular mode.
≥ If no operation takes place for more
than 2 seconds in volume setting, the
display returns to the regular mode.
≥ If no operation takes place for more
than 7 seconds in audio setting ex-
cept volume setting, the display re-
turns to the regular mode.
≥ The volume can also be adjusted di-
rectly using [VOL] on the main unit.
[VOL "]: Increases the bass.
[VOL #]: Decreases the bass.
[VOL "]: Increases the treble.
[VOL #]: Decreases the treble.
[VOL "]: Right enhanced.
[VOL #]: Left enhanced.
[VOL "]: Front enhanced.
[VOL #]: Rear enhanced.
Bass and Treble
You can adjust the bass and treble sound.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: j12 dB to i12 dB (by 2 dB)
Balance and Fader
You can adjust the sound balance among the
front, rear, right and left speakers.
Default: BAL (balance) CNT (center)
FAD (fader) CNT (center)
Setting range: 15 levels each
Select
Select
Select
Select
Press [SEL].
Volume
Default: 18
Setting range: 0 to 40
Select
[VOL "]: Increases the volume.
[VOL #]: Decreases the volume.
Turn [VOL].
(Press [VOL "] or [VOL #]
on the remote control unit.)