Panasonic CQ-RD545LEN - Page 6

Power and Sound Controls continues
Selecting Auxiliary Source
@® Press AUX to select AUX Input mode.
@ Connect the auxiliary equipment (an optional DCC player deck or any
other appropriate equipment) to the AUX Jack.
Press AUX or MODE to resume the previous mode.
Caution:
In order to insert the plug into the “AUX” Jack properly, make sure to
use the correct size of the stereo plug shown on the left.
A- MIN 12mm LONG
B-MAX 10 mm DIA.
C-—MIN 3.5 mm DIA.
Changing Illumination Colors
<Only for RD545/RD535>
Press and hold & (ILLUMI) for more than 2 seconds to switch the illu-
minating color between Amber and Green.
Amber ® Green
t..__
Radio Basics
To change Tuner Mode
Tuner mode is selected if MODE is pressed in Tape, CD changer and
AUX mode.
“ptt 8750
Selecting a Band
Press BAND to select the bands in the following order.
“ST” indicator lights if the station is broadcasting in stereo.
(Only for RD545/RD535/RD525/RD525G/RD530/RD520G)
FM1 > FM2 ® FM3 » AM(LW/MW)
t ¥§
(Only for RD515)
FM1 =» FM2 > FM3
t §
Manual Tuning
Press “\/ TUNE’ or “TUNE A” to move to a lower or higher frequency.
-
FM) 8450
Press and hold “\Y TUNE” or “TUNE A.” to move to a lower or higher
frequency rapidly.
Seek Tuning
Press “\/ TUNE” or “TUNE A\" for more than a half second, then rele-
ase. The radio automatically stops on the next station.