Panasonic CQ-RX400U

CQ-RX400U/CQ-RX200U
18
CQ-RX400U/CQ-RX200U
19
Sirius Receiver
Mode Display
Indicates the satellite receiver is ready.
Band
Channel number Preset number
Sirius Satellite Radio Receiver (continued)
Channel Preset
Up to 6 channels can be preset in SR1 to SR3
respectively.
1
Tune into a channel.
2
Hold down the numeric button [1] to
[6] for 2 sec. or more until the display
blinks once.
Note: New channels overwrite existing saved channel
after this procedure.
Display Change
(DISP: Display)
Notes:
• “– – – –” or blank space is displayed when there
is no information.
• “UPDATING” is displayed when channel
information is updated.
Band/channel number/
preset number
(Data reading)
Channel name (Default)
(Data reading)
Artist name/Composer
name
(Data reading)
Song title
(Data reading)
Category name
Clock time
Press [DISP].
Selection by Category
Category Setting
You can toggle the category on and off
every time you hold down [BAND] for
2 sec. or more.
If the category is set to on, the unit operates as follows
for each button:
Category mode ON
Appears at category mode ON.
• Enables category switching.
• Enables channel selection only within the
category selected by category switching.
Category Selection
1
Press [] or [] to display the
category name. (CAT ON)
2
Press [] or [] while the category
name is displayed to select a category.
Seeking will start.
Operation Flow
1
Press [SRC] to select the Sirius
Satellite Radio mode.
2
Press [BAND] to select a band.
Note: “LOCKED”: If a channel is selected that has been
locked by the parental lock setting, this is displayed after
the channel number.
Follow the procedure below to unlock.
 Hold down [#] for 2 sec. or more.
 Enter a 4-digit code and press [BAND] to confi rm.
3
Select a channel.
Channel Selection
[] (TUNE): Preceding channel
[] (TUNE): Next channel
Note: Hold down for seek forward/reverse.
Preset Channel Selection
Press the numeric button [1] to [6].
English English