3
2 Specifications
2.1. Specifications*
2.2. Dimensions
General
Power Supply DC 12V (11V - 16V)
Test Voltage 14.4V
Negative Ground
Current Consumption Less than 2.1A
(CD mode, 0.5W 4-Channels)
Maximum Power Output 50W × 4 channels (at 1kHz), volume
control maximum
Tone/SQ Adjustable Range SQ Low/Bass:±12dB
(at 60 Hz, 80 Hz, 100 Hz, 200Hz)
SQ Mid: ±12 dB
(at 500 Hz, 1 kHz, 2 kHz, 3kHz)
SQ High/Treble: ±12 dB
(at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
Speaker Impedance 4 - 8 Ω
Pre-amp Output Voltage 2.0 V (CD mode: 1 kHz, 0 dB)
Pre-amp Output Impedance 200 Ω
USB Connector
USB Standard Compatibility 1.1/2.0 Full Speed
Maximum Supply Current 500 mA
Front AUX input
Input impedance 10 kΩ
Allowable external input 2.0 V
Connector
3.5mmφStereo mini-pin
Dimensions (W×H×D)** 178×50×160mm (7”×1-5/16"×6-5/16")
Weight** 1.2 kg (2 lbs. 10 oz)
Disc Player
Sampling Frequency 8 times oversampling
DA Converter 1 bit DAC System
Pick-Up Type Astigma 3-beam
Light Source Semiconductor Laser
Wave Length 790 nm
Frequency Response 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distortion 0.01 % (1 kHz)
Wow and Flutter Below Measurable Limits
Channel Separation 85 dB
FM Radio
Frequency Range 87.9 MHz - 107.9 MHz
Usable Sensitivity 10.2 dBf (0.9 µV, 75 Ω)
50 dB Quieting Sensitivity 15.2 dBf (1.6 µV, 75Ω)
Frequency Response 30 Hz - 15 kHz (±3 dB)
Alternate Channel Selectivity 75 dB
Stereo Separation 35 dB (at 1 kHz)
Image Rejection Ratio 55 dB
IF Rejection Ratio 100 dB
Signal/Noise Ratio 62 dB
AM Radio
Frequency Range 530 kHz - 1710 kHz
Usable Sensitivity 27 dB/µV (22µV, S/N 20 dB)
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
** Above specifications comply with EIA standards.
To Next Page
Loading...
