Panasonic CQ-VD6503W

7
8
CQ-VD6503W
English
FUSE 15AFUSE 15AFUSE 15A
8mmMAX
>PBT< JAM- S Aa
AV-OUT
CAMERA-IN
3
5
6
2 41
Electrical Connections
Caution
¡This unit is designed for use in a car having a 12 V negative ground battery system.
¡Be sure to insulate any exposed wires from the car chassis. Bundle all cables and keep cable terminals free from
any metal parts.
¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery
may clear the memory.
¡Run the cords avoiding the spots where the temperature can be extremely high.
Video Output Terminal (AV-OUT)
Connect the rear monitor. (
a page 15)
Pre-Out Connector (front)
To external amplifier.
Pre-Out Connector (rear)
To external amplifier.
Pre-Out Connector (center)
To external amplifier.
Video Input Terminal (AV1-IN)
Video Input Terminal (AV2-IN)
Note: When an external device is connected
to the system-up connector, the audio termi-
nals, {(R)(Red), (L)(White)}, of AV2-IN are
disabled.
Connect a VCR, camcorder, other brand’s car
navigation system, etc. (a page 15)
Camera Input Terminal (CAMERA-IN)
Connect a rear view camera. (
a page 16)
(R)(Red)
(L)(White)
(Yellow)
(Yellow)
(R)(Red)
(Black) (White)
(Red)
(Black)
(L)(White)
(Yellow)
q
Pre-Out Subwoofer connector (mono)
To external amplifier.
w
e
r
t
y
Fuse (15 A) Refer fuse replacement to your nearest
authorized Panasonic Service Centre. Do not try fuse
replacement by yourself.
CQ-VD6503W
(Rear)
6503WII01eng06.3.66:32PMページ8