14
15
CQ-VW100W
English
Ext. In
Note:
¡
You can set up the system so that the Ext. In mode is
not selected (source skip). (
a
page 24)
¡
If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
Input
Preparation:
¡Connect an optional external device to the Ext. In.
You can view the images and listen to the sounds from
the connected external devices in the Ext. In mode
respectively.
To switch Operation Screen ON, touch the center of
touch panel.
q
Touch
“
Source Button
”
.
d
w
Touch
(Ext. In) on the
Source Selection
Screen.
(Content varies with
connected devices)
Source Selection
Press
[SRC/PWR]
to change to the
desired mode.
To Next Page
Loading...
