- Servicing after installation can be carried-out by removing the front covers.
2.3.5. Easy test operation
- Test operation can be carried out for both indoor and outdoor units.
2.3.6. Long pipe design
Max piping length: 50 (m)
24BB~50BB
Height
difference/
equivalent pipe
length
30/50
2.3.7. Internal pipe connection
- Pipes are connected inside the units (inside the side covers), making the final appearance more
attractive.
- Pipes can be diverted outward in any of four directions (forward, right, down, rear).
- Small liquid pipe diameters of 9.52mm for 43BB and 50BB models, making installation work much
easier.
Liquid-side pipe diameters (mm): 9.52 (43BB~50BB / models)
2.3.8. Centralized draining method
- Even when multiple outdoor units are installed to a wall, the drain outlets can be concentrated into
a single drain pipe. This makes installation easier and also improve appearance.
14