6
Note
• Specifications are subject to change without notice for further improvement.
Compressor Description — Rotary (1 cylinder)
rolling piston type
Motor Type — Induction (2-poles)
Rated Output kW — 1.5
Air Circulation Description Cross-flow Fan Propeller Fan
Material ASHT-18 PP
Motor Type Transistor (8-poles) Induction (6-poles)
Input W — 125.7 - 143.9
Rated Output W 30 80
Fan Speed Low rpm Cooling; 1,190 - 1,190
Heating; 1,270 - 1,270
460 - 520
Medium rpm Cooling; 1,320 - 1,320
Heating; 1,320 - 1,320
—
High rpm Cooling; 1,400 - 1,400
Heating; 1,430 - 1,430
815 - 845
SuperHigh rpm Cooling; 1,430 - 1,430 —
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium
Fin Type Slit Fin Corrugated Fin
Row/Stage (Plate fin configuration, forced draft)
2 × 15 2 × 28
FPI 21 16
Size (W × H × L) mm 810 × 315 × 25.4 827.7 × 711.2 × 44
862.2
Refrigerent Control Device — Capillary Tube
Refrigeration Oil
(cm
3
)
— SUNISO 4GDID or ATMOS
M60 or ATMOS 56M (1,000)
Refrigerant (R-22) g (oz) — 1,710 (60.4)
Thermostat ——
Protection Device — Inner Protector
Capillary Tube Length mm — Cooling; 970, Heating; 820
Flow Rate l/mm — Cooling; 11.0, Heating; 27.0
Inner Diameter mm — Cooling; 1.6, Heating; 2.2
Air Filter Material
Style
P. P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 45 µF, 400/440VAC
Fan Motor Capacitor µF, VAC — 3.5 µF, 440VAC
Unit CS-A18EKH CU-A18EKH
To Next Page
Loading...
Need help?
General
