5
1. Cooling capacities are based on indoor temperature of 27°C D.B. (80.6°F D.B.), 19.0°C W.B. (66.2°F W.B.) and outdoor air
temperature of 35°C D.B. (95°F D.B.), 24°C W.B. (75.2°F W.B.)
2. Heating capacities are based on indoor temperature of 20°C D.B. (68°F D.B.) and outdoor air temperature of 7°C D.B. (44.6°F
D.B.), 6°C W.B. (42.8°F W.B.)
Note:
• Specification are subjected to change without prior notice for further improvement.
Item Unit
Power Source (Phase, Voltage, Cycle) ø Single Single
V 220 230
Hz 50 50
Input power Cooling W 610 630
Heating W 500 525
Starting Current A 12.4 12.4
Running Current Cooling A 2.9 2.8
Heating A 2.4 2.4
Power Factor Cooling % 96 98
Heating % 95 95
Power factor means total figure of compressor, indoor fan motor and outdoor fan motor.
Power Cord Number of core 3 (1.5mm)
Length m (ft) 2 (6)
Thermostat ——
Protection Device — 2 Stage Overload Protector
To Next Page
Loading...
Need help?
General
