Panasonic CS-A95KE - 8.12. Powerful Mode Operation

8.12. Powerful Mode Operation
Purpose of this operation is to be obtain the setting temperature quickly.
1.
Cooling and Soft Dry Mode
•
When the Powerful Mode is set, the set temperature will be automatically decreased 3°C against the present setting
temperature. This operation automatically will be running under Super High Fan speed.
•
Vertical Airflow Direction:-
In “Manual” setting, the vane will automatically shift down 10°C lower than previous setting.
In “Auto” setting, the vane will automatically swing up and down. However the upper and down. However the upper and
lower limit will be shifted 10° downward.
2.
Heating Mode
•
When the Powerful Mode is set, the set temperature will be automatically increased 3°C against the present setting
temperature.
•
The Fan Speed will shift as shown below:
•
Vertical Airflow Direction:-
In “Manual” setting, the vane will automatically shift down 5°C lower than previous setting.
In “Auto” setting, the vane will automatically shift between upper and lower limit depending on the intake air temperature as
Heating Mode, Airflow Direction Auto-Control. However the upper and lower limit will be shifted 5°C downward.
3.
Powerful mode will operate for 15 minutes only.
4.
Powerful Mode will stop if:
•
Power mode button is pressed again.
•
Stopped by ON / OFF switch.
•
Timer-off activates.
•
Economy mode button is pressed.
•
Sleep mode button is pressed.
•
Operating mode is changed.
32
S-A75KE CU-A75KE / CS-A95KE CU-A95KE / CS-A125KE CU-A125KE