Power Cord Length
Number of core-wire
m 2.0
3 (1.0 mm
2
)
—
—
Dimensions Height inch (mm) 10 - 31/32 (279) 18 - 29/32 (480)
Width inch (mm) 31 - 15/32 (799) 30 - 23/32 (780)
Depth inch (mm) 7 - 27/32 (199) 9 - 21/32 (245)
Net Weight lb (kg) 20 (9.0) 64 (29.0)
Compressor Type — Rotary (1 cylinder)
rolling piston type
Motor Type — Induction (2-poles)
Rated Output W — 600
Air Circulation Type Cross-flow Fan Propeller Fan
Material AS + Glass Fiber 30% AES + Glass Fiber 12%
Motor Type Induction (4-poles) Induction (6-poles)
Input W 20.6 - 19.1 65.8 - 57.5
Rate Output W 10 20
Fan Speed Low rpm Cooling; 820 - 780 —
Heating; 855 - 825
Medium rpm Cooling; 855 - 825 —
Heating; 1,040 - 1,005
High rpm Cooling; 1,040 - 1,005 —
Heating; 1,160 - 1,140
SuperHigh rpm Cooling; 1,160 - 1,140 —
Heating; 1,160 - 1,140
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Pre Coat)
Fin Type Slit Fin Louver Fin
Row / Stage (Plate fin configuration, forced draft)
2×14 1×18
FPI 18 19
Size (W × H × L) mm 614 × 294 × 25.4 856 × 457.2 × 22
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
(290)
Refrigerant (R-22) g (oz) — 815 (28.8)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — Cooling; 850, Heating; 360
Flow Rate l/min — Cooling; 4.5, Heating; 10.5
Inner Diameter mm — Cooling; 1.1, Heating; 1.3
Air Filter Material
Style
(c.c) P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 15 µF, 440VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 400VAC 1.2 µF, 400VAC
•
Specifications are subject to change without notice for further improvement.
7
CS-A75KE CU-A75KE / CS-A95KE CU-A95KE / CS-A125KE CU-A125KE
To Next Page
Loading...
Need help?
General
