To Next PageTo Next PageWhy is my Panasonic Air Conditioner freezing up during cooling?
If your Panasonic Air Conditioner is experiencing indoor freeze protection during cooling, it's likely due to an air short circuit at the indoor unit. Check the indoor heat exchanger, air filter, and for any air circulation short circuits.
What to do if my Panasonic Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, make sure the batteries are inserted correctly or replace weak batteries.
What does it mean when the timer indicator is always on in my Panasonic CS-E12LKEW Air Conditioner?
If the timer indicator on your Panasonic Air Conditioner is always on, it means the timer setting repeats daily once set.
What should I do if my Panasonic CS-E12LKEW displays an indoor E-Ion abnormality?
If your Panasonic Air Conditioner shows an Indoor E-Ion abnormality, check the E-Ion PCB.
What causes outdoor direct current (DC) peak detection in a Panasonic CS-E12LKEW Air Conditioner?
If your Panasonic Air Conditioner shows an outdoor direct current (DC) peak detection issue, it's likely due to a faulty power transistor module or a compressor lock. Check the power transistor module.
How to fix an outdoor discharge pipe temperature sensor abnormality on a Panasonic CS-E12LKEW Air Conditioner?
If your Panasonic Air Conditioner displays an outdoor discharge pipe temperature sensor abnormality, it means the sensor is either open or short circuit. Check the outdoor discharge pipe temperature sensor lead wire and connector.
Why does my room have a peculiar odour when using Panasonic Air Conditioner?
A peculiar odour in the room when using your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
What to do if Patrol sensor or e-ion indicator on the indoor unit is blinking on my Panasonic CS-E12LKEW Air Conditioner?
To resolve this, stop the Patrol or e-ion operation and then restart it. If the patrol sensor or e-ion indicator continues to blink, please consult an authorized dealer.
What should I do if my Panasonic CS-E12LKEW shows an outdoor heat exchanger temperature sensor 2 abnormality?
If your Panasonic Air Conditioner displays an outdoor heat exchanger temperature sensor 2 abnormality, it means the sensor is either open or short circuit. Check the outdoor heat exchanger temperature sensor 2 lead wire and connector.
Why does my Panasonic Air Conditioner make a cracking sound during operation?
The cracking sound during operation of your Panasonic Air Conditioner is due to changes in temperature causing the expansion and contraction of the unit.
Explains general safety rules and the meaning of warning/caution symbols.
Safety advice specific to indoor/outdoor units and the remote control.
Safety guidelines for electrical connections and power handling.
Recommended indoor temperature ranges for cooling and heating.
Explains the concept of multi air conditioner systems and space saving.
Describes the operation of indoor units in a multi-system.
Notes on e-ion operations when the air conditioner is turned off.
Temperature ranges for multi split outdoor units.
Safety, cleaning methods, and maintenance tips for the indoor unit.
Details on parts like front panel, sensors, filters, and their functions.
Explains the remote control indicators, buttons, and their functions.
How to select temperature, operation modes (Auto, Heat, Cool, Dry), and fan speed.
Explains ECO PATROL for energy saving and e-ion for air purification.
Function to achieve desired temperature quickly and setting ON/OFF timers.
Lists common operating sounds or behaviors that are not errors.
Steps to check before calling for servicing for common issues.
How to retrieve error codes and conditions requiring authorized dealer service.
Guidelines for the collection and disposal of used electrical products and batteries.
Specific instructions for users within the European Union regarding waste disposal.
Guidance for disposal methods in countries outside the European Union.
Steps for preparing the remote control, including battery insertion.
Instructions for selecting the desired operating mode.
How to start/stop the unit and select the desired temperature.
Explains general safety rules and the meaning of warning/caution symbols.
Safety advice specific to indoor/outdoor units and the remote control.
Safety guidelines for electrical connections and power handling.
Recommended indoor temperature ranges for cooling and heating.
Explains the concept of multi air conditioner systems and space saving.
Describes the operation of indoor units in a multi-system.
Notes on e-ion operations when the air conditioner is turned off.
Temperature ranges for multi split outdoor units.
Safety, cleaning methods, and maintenance tips for the indoor unit.
Details on parts like front panel, sensors, filters, and their functions.
Explains the remote control indicators, buttons, and their functions.
How to select temperature, operation modes (Auto, Heat, Cool, Dry), and fan speed.
Explains ECO PATROL for energy saving and e-ion for air purification.
Function to achieve desired temperature quickly and setting ON/OFF timers.
Lists common operating sounds or behaviors that are not errors.
Steps to check before calling for servicing for common issues.
How to retrieve error codes and conditions requiring authorized dealer service.
Guidelines for the collection and disposal of used electrical products and batteries.
Specific instructions for users within the European Union regarding waste disposal.
Guidance for disposal methods in countries outside the European Union.
Steps for preparing the remote control, including battery insertion.
Instructions for selecting the desired operating mode.
How to start/stop the unit and select the desired temperature.
General| Type | Split system |
|---|---|
| Thermostat range | - °C |
| Hose length (max) | 15 m |
| Remotely operated | Yes |
| Cooling capacity (max) | 3010 BTU/h |
| Dehumidifying capacity | 2 l/h |
| Heating capacity (max) | 3440 BTU/h |
| Cooling capacity in watts (max) | 3500 W |
| Heating capacity in watts (max) | 4000 W |
| Cooling energy efficiency (EER, W/W) | 4.07 |
| Heating energy efficiency (COP, W/W) | 4.21 |
| Indoor unit type | Wall-mountable |
| Airflow | 750 m³/h |
| Noise level | 58 dB |
| Power requirements | 230 V |
Weight and Dimensions| Weight | 9000 g |
|---|---|
| Dimensions (WxDxH) | 780 x 204 x 290 mm |
