Why does mist emerge from my Panasonic Air Conditioner indoor unit?
Mist emerges from the indoor unit of your Panasonic Air Conditioner due to the condensation effect caused by the cooling process.
What to do if my Panasonic Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, make sure the batteries are inserted correctly or replace weak batteries.
What does it mean when the timer indicator is always on in my Panasonic CS-E12LKEW Air Conditioner?
If the timer indicator on your Panasonic Air Conditioner is always on, it means the timer setting repeats daily once set.
What does it mean when the power indicator blinks during HEAT mode with no warm air supply in my Panasonic Air Conditioner?
If the power indicator blinks during HEAT mode and there's no warm air supply from your Panasonic Air Conditioner, the unit is likely in defrost mode and the AIR SWING is set to AUTO.
What to do if my Panasonic CS-E12LKEW unit stops and the timer indicator blinks?
To address this issue, use the remote control to retrieve the error code: press for 5 seconds, then press until you hear a beep sound and note the error code. For certain errors, you may restart the unit with limited operation, indicated by 4 beeps during start-up. If the problem persists, turn the unit off and provide the error code to an authorized dealer.
Why does my Panasonic CS-E12LKEW emit water or steam from the outdoor unit?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
What to do if my Panasonic CS-E12LKEW Air Conditioner is not working efficiently?
If your Panasonic Air Conditioner's heating or cooling isn't working efficiently, try the following: ensure the temperature is set correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why is my Panasonic Air Conditioner noisy during operation?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline and ensure the front panel is closed properly.
What to do if my Panasonic CS-E12LKEW does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, make sure the receiver isn't obstructed. Be aware that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer if this is the case.
Why does my Panasonic Air Conditioner make a cracking sound during operation?
The cracking sound during operation of your Panasonic Air Conditioner is due to changes in temperature causing the expansion and contraction of the unit.
Explains general safety rules and the meaning of warning/caution symbols.
Safety advice specific to indoor/outdoor units and the remote control.
Safety guidelines for electrical connections and power handling.
Recommended indoor temperature ranges for cooling and heating.
Explains the concept of multi air conditioner systems and space saving.
Describes the operation of indoor units in a multi-system.
Notes on e-ion operations when the air conditioner is turned off.
Temperature ranges for multi split outdoor units.
Safety, cleaning methods, and maintenance tips for the indoor unit.
Details on parts like front panel, sensors, filters, and their functions.
Explains the remote control indicators, buttons, and their functions.
How to select temperature, operation modes (Auto, Heat, Cool, Dry), and fan speed.
Explains ECO PATROL for energy saving and e-ion for air purification.
Function to achieve desired temperature quickly and setting ON/OFF timers.
Lists common operating sounds or behaviors that are not errors.
Steps to check before calling for servicing for common issues.
How to retrieve error codes and conditions requiring authorized dealer service.
Guidelines for the collection and disposal of used electrical products and batteries.
Specific instructions for users within the European Union regarding waste disposal.
Guidance for disposal methods in countries outside the European Union.
Steps for preparing the remote control, including battery insertion.
Instructions for selecting the desired operating mode.
How to start/stop the unit and select the desired temperature.
General| Type | Split system |
|---|---|
| Thermostat range | - °C |
| Hose length (max) | 15 m |
| Remotely operated | Yes |
| Cooling capacity (max) | 3010 BTU/h |
| Dehumidifying capacity | 2 l/h |
| Heating capacity (max) | 3440 BTU/h |
| Cooling capacity in watts (max) | 3500 W |
| Heating capacity in watts (max) | 4000 W |
| Cooling energy efficiency (EER, W/W) | 4.07 |
| Heating energy efficiency (COP, W/W) | 4.21 |
| Indoor unit type | Wall-mountable |
| Airflow | 750 m³/h |
| Noise level | 58 dB |
| Power requirements | 230 V |
Weight and Dimensions| Weight | 9000 g |
|---|---|
| Dimensions (WxDxH) | 780 x 204 x 290 mm |
To Next Page
