To Next PageTo Next PageWhy is my Panasonic CS-E15LKEW freezing up during cooling?
If your Panasonic Air Conditioner is experiencing indoor freeze protection during cooling, it's likely due to an air short circuit at the indoor unit. Check the indoor heat exchanger, air filter, and for any air circulation short circuits.
What to do if my Panasonic Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, make sure the batteries are inserted correctly or replace weak batteries.
What does it mean when the timer indicator is always on in my Panasonic CS-E15LKEW Air Conditioner?
If the timer indicator on your Panasonic Air Conditioner is always on, it means the timer setting repeats daily once set.
What should I do if my Panasonic Air Conditioner displays an indoor E-Ion abnormality?
If your Panasonic Air Conditioner shows an Indoor E-Ion abnormality, check the E-Ion PCB.
What causes outdoor direct current (DC) peak detection in a Panasonic CS-E15LKEW?
If your Panasonic Air Conditioner shows an outdoor direct current (DC) peak detection issue, it's likely due to a faulty power transistor module or a compressor lock. Check the power transistor module.
How to fix an outdoor discharge pipe temperature sensor abnormality on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays an outdoor discharge pipe temperature sensor abnormality, it means the sensor is either open or short circuit. Check the outdoor discharge pipe temperature sensor lead wire and connector.
Why does my room have a peculiar odour when using Panasonic Air Conditioner?
A peculiar odour in the room when using your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
What to do if Patrol sensor or e-ion indicator on the indoor unit is blinking on my Panasonic Air Conditioner?
To resolve this, stop the Patrol or e-ion operation and then restart it. If the patrol sensor or e-ion indicator continues to blink, please consult an authorized dealer.
What should I do if my Panasonic CS-E15LKEW shows an outdoor heat exchanger temperature sensor 2 abnormality?
If your Panasonic Air Conditioner displays an outdoor heat exchanger temperature sensor 2 abnormality, it means the sensor is either open or short circuit. Check the outdoor heat exchanger temperature sensor 2 lead wire and connector.
Why does my Panasonic CS-E15LKEW Air Conditioner make a cracking sound during operation?
The cracking sound during operation of your Panasonic Air Conditioner is due to changes in temperature causing the expansion and contraction of the unit.
Safety guidelines for electrical power connections, including cord usage and earthing.
Precautions for handling and operating the indoor and outdoor units to prevent damage or injury.
Safety advice regarding the use and handling of the remote control unit.
Specifies operating temperature ranges for cooling and heating for single split units.
Details operating temperature ranges for multi-split air conditioning systems.
Explanation of multi air conditioner systems connecting multiple indoor units to one outdoor unit.
Describes how indoor units operate individually or simultaneously within a multi-system.
Guidelines for cleaning the indoor unit, specifying safe cleaning agents and methods.
Information on the Eco Patrol sensor, its function, and handling precautions.
Instructions for using the auto on/off button when the remote is lost or malfunctioning.
Procedures for cleaning and replacing e-ion filters for optimal air purification.
Recommendation for cleaning the active e-ion generator to ensure fresh air.
Instructions for turning the unit on/off and setting the desired temperature.
Guide to selecting different operation modes like AUTO, HEAT, COOL, and DRY.
How to select fan speed and adjust vertical and horizontal airflow directions.
Using features like Quiet environment, Eco Patrol, and quick temperature achievement.
Procedure for setting ON and OFF timers for automated operation.
Common operational sounds or visual effects that do not indicate a malfunction.
Actions to take before calling for service, covering operational issues and remote control problems.
Steps to retrieve error codes when the unit stops and the timer indicator blinks.
Guidance for seasonal inspection and preparing the unit for extended periods of non-use.
Conditions requiring immediate consultation with an authorized dealer for service.
Information on collecting and disposing of used electrical/electronic products and batteries.
Guidelines specific to the European Union for waste disposal and recycling.
Information for users outside the European Union regarding disposal methods.
Steps for preparing the remote control, including battery installation and clock setting.
Instructions for selecting operating modes, temperature, and starting/stopping the unit.
Safety guidelines for electrical power connections, including cord usage and earthing.
Precautions for handling and operating the indoor and outdoor units to prevent damage or injury.
Safety advice regarding the use and handling of the remote control unit.
Specifies operating temperature ranges for cooling and heating for single split units.
Details operating temperature ranges for multi-split air conditioning systems.
Explanation of multi air conditioner systems connecting multiple indoor units to one outdoor unit.
Describes how indoor units operate individually or simultaneously within a multi-system.
Guidelines for cleaning the indoor unit, specifying safe cleaning agents and methods.
Information on the Eco Patrol sensor, its function, and handling precautions.
Instructions for using the auto on/off button when the remote is lost or malfunctioning.
Procedures for cleaning and replacing e-ion filters for optimal air purification.
Recommendation for cleaning the active e-ion generator to ensure fresh air.
Instructions for turning the unit on/off and setting the desired temperature.
Guide to selecting different operation modes like AUTO, HEAT, COOL, and DRY.
How to select fan speed and adjust vertical and horizontal airflow directions.
Using features like Quiet environment, Eco Patrol, and quick temperature achievement.
Procedure for setting ON and OFF timers for automated operation.
Common operational sounds or visual effects that do not indicate a malfunction.
Actions to take before calling for service, covering operational issues and remote control problems.
Steps to retrieve error codes when the unit stops and the timer indicator blinks.
Guidance for seasonal inspection and preparing the unit for extended periods of non-use.
Conditions requiring immediate consultation with an authorized dealer for service.
Information on collecting and disposing of used electrical/electronic products and batteries.
Guidelines specific to the European Union for waste disposal and recycling.
Information for users outside the European Union regarding disposal methods.
Steps for preparing the remote control, including battery installation and clock setting.
Instructions for selecting operating modes, temperature, and starting/stopping the unit.
General| Thermostat range | - °C |
|---|---|
| Hose length (max) | 15 m |
| Remotely operated | Yes |
| Cooling capacity (max) | 3610 BTU/h |
| Dehumidifying capacity | 2.4 l/h |
| Heating capacity (max) | 4640 BTU/h |
| Cooling capacity in watts (max) | 4200 W |
| Heating capacity in watts (max) | 5400 W |
| Cooling energy efficiency (EER, W/W) | 3.44 |
| Heating energy efficiency (COP, W/W) | 3.68 |
| Indoor unit type | Wall-mountable |
| Airflow | 750 m³/h |
| Noise level | 59 dB |
| Power requirements | 230 V |
Weight and Dimensions| Weight | 9000 g |
|---|---|
| Dimensions (WxDxH) | 780 x 204 x 290 mm |
