EasyManua.ls Logo

Panasonic CS-E7LKR - Advanced Remote Features & Timer; ECO PATROL, Air Quality, and Humidity; Quiet Operation and Timer Settings

Panasonic CS-E7LKR
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
NOTES
NOTES
QUIET/POWERFUL
,
PATROL
,
ECO PATROL
Can be activated in all modes and can be cancelled
by pressing the respective button again.
QUIET/POWERFUL
,
ECO PATROL
Cannot be selected at the same time.
Cannot be activated during “MILD DRY COOLING”
operation is activated.
TO SET THE TIMER
TO SET THE TIMER
2 sets of ON and OFF timers are available to turn ON
or OFF the unit at different preset time.
Complete below procedures to set each timer:
ON
OFF
1
Cancel
Cancel
2
SET
3
Select ON or OFF timer
Set the
time
Con rm
Example of application at living room:
Morning: ON
at 07:00 (Wake up)
OFF at 08:00 (Out for work)
Evening: ON at 17:00 (Back home)
OFF at 22:00 (Sleep)
To cancel ON or OFF timer, press
ON
or
OFF
to
select respective or then press
CANCEL
.
If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
ON
or
OFF
to select respective or then press
SET
.
Upcoming timer will be displayed and will be activated
in sequence.
When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
11
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
12
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
13
Press to restore the remote control’s default setting.
14
Not used in normal operations.
E18LKR, E21LKR, E24LKR, E28LKR
MODE
ON
OFF
SET
CANCEL
TIMER
TEM
P
FAN SPEED
MILD DRY
QUIET/POWERF
UL
123
SET
CHECK CLOCK
RESET
AC RC
AIR
SWING
6
7
TO MONITOR HUMAN
PRESENCE & ACTIVITY FOR
ENERGY SAVING
ECO
PATROL
ECO 1 ECO 2 ECO OFF
+3°C
-3°C
Heat Source & Movement
Low
High
+2°C
-2°C
Set Temperature
None
-1°C
Set Fan Speed
COOL/
DRY Mode
HEAT Mode
* Medium
Fan
*
+1 tap
— ECO 1 - To optimize comfort and energy saving.
--- ECO 2 - To maximize energy saving.
* Applicable during COOL/DRY Mode only.
8
TO MONITOR AIR QUALITY
Detects air quality; e-ion operation activates when air
quality is at dirty level.
Can be activated even when the unit is turned off.
Patrol starts automatically with the unit switched on with
OFF/ON
.
9
TO IMPROVE HUMIDITY AND
MOISTURE LEVEL
MILD DRY COOLING
This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
When vertical air ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
10
TO SWITCH BETWEEN QUIET & POWERFUL
Q
UIET/POWERFUL
QUIET POWERFUL NORMAL
TO ENJOY QUIET OPERATION
This operation reduces air ow noises.
TO REACH TEMPERATURE QUICKLY
This operation will stop automatically
after 4 hours.
POWERFUL

Related product manuals