To Next PageTo Next PageHow to fix indoor/outdoor abnormal communication on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays an indoor/outdoor abnormal communication error, it could be due to a faulty indoor or outdoor unit PCB, wiring errors, or broken wires in the connection between the units. To resolve this, check the indoor/outdoor wire terminal, the indoor/outdoor PCB, and the indoor/outdoor connection wire.
What to do if the indoor fan motor mechanism is locked in my Panasonic CS-E7PKEW Air Conditioner?
If your Panasonic Air Conditioner's indoor fan motor mechanism is locked, this could be due to a short circuit inside the fan motor winding, broken wires inside the fan motor, broken fan motor lead wires, Hall IC malfunction, or a faulty indoor unit PCB. To address this, check the fan motor lead wire and connector.
Why is the outdoor fan motor mechanism locked on my Panasonic CS-E7PKEW Air Conditioner?
If the outdoor fan motor mechanism is locked on your Panasonic Air Conditioner, it might be due to a short circuit inside the fan motor winding, broken wires inside the fan motor, broken fan motor lead wires, a Hall IC malfunction, or a faulty outdoor unit PCB. Check the outdoor fan motor lead wire and connector to troubleshoot this issue.
What causes an indoor unit capacity unmatched error on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner shows an indoor unit capacity mismatch, it could be due to wrong models being interconnected, incorrect indoor or outdoor unit PCBs being mounted, defective PCBs, or signal transmission errors from wrong wiring or broken wires. Check the indoor/outdoor connection wire, Indoor/outdoor PCB, and specification and combination table in the catalogue to resolve this.
How do I troubleshoot an indoor intake air temperature sensor abnormality on a Panasonic CS-E7PKEW?
If your Panasonic Air Conditioner is showing an abnormality with the indoor intake air temperature sensor, this could be due to a faulty connector connection, a faulty sensor, or a faulty PCB. Check the indoor intake air temperature sensor lead wire and connector.
What causes an indoor heat exchanger temperature sensor abnormality in a Panasonic CS-E7PKEW?
If your Panasonic Air Conditioner displays an indoor heat exchanger temperature sensor abnormality, it could be due to a faulty connector connection, a faulty sensor, or a faulty PCB. To address this, check the indoor heat exchanger temperature sensor lead wire and connector.
How to fix compressor temperature sensor abnormality in Panasonic CS-E7PKEW Air Conditioner?
If your Panasonic Air Conditioner shows a compressor temperature sensor abnormality, it may be due to a faulty connector connection, a faulty sensor, or a faulty PCB. Check the compressor temperature sensor lead wire and connector.
What to do if the outdoor air temperature sensor is abnormal on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner is showing an outdoor air temperature sensor abnormality, it could be due to a faulty connector connection, a faulty sensor, or a faulty PCB. Check the outdoor air temperature sensor lead wire and connector.
How to troubleshoot outdoor heat exchanger temperature sensor 2 abnormality on Panasonic CS-E7PKEW Air Conditioner?
If your Panasonic Air Conditioner displays an outdoor heat exchanger temperature sensor 2 abnormality, it could be due to a faulty connector connection, a faulty sensor, or a faulty PCB. Check the outdoor heat exchanger temperature sensor 2 lead wire and connector.
General| Indoor unit type | Wall-mountable |
|---|---|
| Indoor unit weight | 10000 g |
| Indoor units quantity | 1 |
| Cooling airflow (indoor unit) | 732 m³/h |
| Heating airflow (indoor unit) | 768 m³/h |
| Indoor unit dimensions (WxDxH) | 870 x 255 x 295 mm |
| Indoor unit noise level (high speed) | 38 dB |
| Type | Air conditioner indoor unit |
| Ionizer | - |
| Remotely operated | Yes |
| Cooling capacity (max) | 7000 BTU/h |
| Air conditioner functions | Cooling, Heating |
| Cooling capacity in watts (max) | 2400 W |
| Cooling capacity in watts (min) | 750 W |
| Heating capacity in watts (max) | 2800 W |
| Cooling energy efficiency (EER, W/W) | 4.41 |
| Heating energy efficiency (COP, W/W) | 4.44 |
| Seasonal efficiency rating (cooling) (SEER) | 6.7 |
| Seasonal efficiency rating (heating) (SCOP) (Average heating season) | 4.3 |
| Noise level (low speed) | 20 dB |
| Noise level (medium speed) | 25 dB |
| Power requirements | 230V, 10A |
| Power consumption (cooling) (max) | - W |
| Power consumption (heating) (max) | 1010 W |
| Power consumption (heating) (min) | 230 W |
| Annual energy consumption (cooling) | 110 kWh |
| Annual energy consumption (heating) (Average heating season) | 684 kWh |
Guidelines for choosing optimal installation locations for indoor and outdoor units.
Step-by-step guide for installing indoor units, including hole drilling.
Guides for installing outdoor units and connecting piping.
Procedures for system evacuation and piping connection.
Location guidelines for CS-E28PKES/CU-E28PKE models.
Installation steps for indoor units of specific models.
Installation steps for outdoor units of specific models.
Procedures for system evacuation and piping for specific models.
Explains cooling, soft dry, heating, fan speed, and basic functions.
Covers restart, current, IPM, and compressor overheating protections.
Details protections for outdoor air temp, overload, freeze, and dew prevention.
Explains protections for intake air temp, outdoor air temp, and oil return.
Diagnoses refrigeration cycle issues using pressure, temperature, and current data.
Explains self-diagnosis functions and lists error codes.
Provides detailed troubleshooting steps for specific error codes.
