5
1. Cooling capacities are based on indoor temperature of 27°C D.B. (80.6°F D.B.), 19.0°C W.B. (66.2°F W.B.) and outdoor air
temperature of 35°C D.B. (95°F D.B.), 24°C W.B. (75.2°F W.B.)
2. Heating capacities are based on indoor temperature of 20°C D.B. (68°F D.B.) and outdoor air temperature of 7°C D.B. (44.6°F
D.B.), 6°C W.B. (42.8°F W.B.)
Note
• Specifications are subject to change without notice for further improvement.
Heat Exchanger
Fin Material Aluminium (Pre Coat) Aluminium
Fin Type Slit Fin Corrugated Fin
Row x Stage x FPI 2 x (15/18/17) x 19.5 2 x 23 x 17
Size (W x H x L) mm 671 x 322.6 x 30.9
36.4 x 504 x 824.2
793.7
Air Filter
Material PP —
Type One-Touch —
Item Unit
Power Source (Phase, Voltage, Cycle)
ø Single
V 230
Hz 50
Input Power W
Cooling; 510 (120 ~ 700)
Heating; 690 (115 ~ 1.72k)
Starting Current A 3.2
Running Current A
Cooling; 2.4
Heating; 3.2
Power Factor %
Cooling; 92
Heating; 94
Power factor means total figure of compressor, indoor fan motor and outdoor fan motor.
*Maximum over current protection A 8.0
Power Cord
Number of core 3 (1.0mm)
Length m 1.6
Thermostat Electronic Control
Protection Device Electronic Control
ITEM UNIT INDOOR UNIT OUTDOOR UNIT
To Next Page
Loading...
Need help?
General
