To Next Page
K
katelyn93Sep 9, 2025
Why flap is closed during deice operation in Panasonic Air Conditioner?
- Wwilliam09Sep 9, 2025
During deice operation on your Panasonic Air Conditioner, the flap is closed because the AIR SWING is set to AUTO.
Why flap is closed during deice operation in Panasonic Air Conditioner?
During deice operation on your Panasonic Air Conditioner, the flap is closed because the AIR SWING is set to AUTO.
What to do if my Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped and verify if any timers have been set.
Why is my Panasonic CS-HZ25UKE Air Conditioner remote control not working?
If the remote control for your Panasonic Air Conditioner isn't working, first ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
Why Panasonic CS-HZ25UKE Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, make sure the receiver is not obstructed. Note that certain fluorescent lights might interfere with the signal transmitter.
Why POWER indicator blinks during HEAT mode with no warm air supply in Panasonic Air Conditioner?
The POWER indicator on your Panasonic Air Conditioner may blink during HEAT mode with no warm air because the unit is in defrost mode and the AIR SWING is set to AUTO.
Why Panasonic Air Conditioner POWER indicator blinks and stops when operating in COOL/DRY mode?
The POWER indicator on your Panasonic Air Conditioner may blink and stop when operating in COOL/DRY mode because the system has locked to operate in HEAT mode only.
Why is there discoloration of some plastic parts on my Panasonic Air Conditioner?
Discoloration of some plastic parts in your Panasonic Air Conditioner is subject to the material types used in plastic parts and is accelerated when exposed to heat, sunlight, UV light, or environmental factors.
Why Wireless LAN LED stays ON during unit turn OFF in Panasonic CS-HZ25UKE Air Conditioner?
The Wireless LAN LED stays ON during unit turn OFF because the unit’s LAN connection with the router is activated.
Why does airflow continue after my Panasonic CS-HZ25UKE Air Conditioner is turned off?
The airflow might continue even after your Panasonic Air Conditioner has stopped to extract remaining heat from the indoor unit, which can take up to 30 seconds.
Why does the indoor fan stop during heating operation in my Panasonic CS-HZ25UKE?
The indoor fan of your Panasonic Air Conditioner might stop occasionally during heating operation to avoid unintended cooling effect.
Instructions for inserting batteries into the remote control.
Guide to setting the clock on the remote control.
How to select operating mode and desired temperature.
Steps to start or stop the air conditioner unit.
Explains warning symbols and general safety advice.
Precautions for safe operation and handling of indoor and outdoor units.
Guidelines to prevent overheating, fire, or electric shock related to power supply.
Warnings and precautions related to the flammable R32 refrigerant.
Safety measures and requirements for installing the unit and piping.
Procedures for detecting leaks, fire extinguishers, and avoiding ignition sources.
Details on the Network Adaptor, including model, input voltage, and wireless specs.
Instructions for controlling airflow direction and fan speed.
How to use the maintenance heating function.
Steps to connect the unit to a home wireless LAN.
Guide to installing and setting up the Panasonic Comfort Cloud app.
Steps to register a new air conditioner device in the app.
Instructions for connecting the unit via WPS or AP mode.
How to set a password for registering the air conditioner.
Final steps after registration, including naming the unit and checking energy consumption.
Lists common symptoms and their potential causes without indicating malfunction.
Instructions on how to retrieve error codes using the remote control.
Guidelines for the collection and disposal of old electrical equipment and batteries.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.50 |
| Power Supply | 230 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Energy Efficiency Ratio (Cooling) | 3.50 |
| Noise Level (Indoor) | 19 dB(A) |
