19
English
To set the timer
Note
, ,
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
• Cannot be selected at the same time.
TIMER
OFF
TIMER
ON
3
1
2
1
Select ON or OFF
timer
Example:
OFF at 22:00
• Each time pressed:
TIMER
OFF
Cancel
2 Set the time
2
3 Confi rm
SET
• To cancel ON or OFF timer, press
TIMER
ON
or
TIMER
OFF
to select respective or then
press
CANCEL
.
• If timer is cancelled manually or due to
power failure, you can restore the timer
again by pressing
TIMER
ON
or
TIMER
OFF
to select
respective
or then press
SET
.
• The nearest timer setting will be displayed
and will activate in sequence.
• Timer operation is based on the clock set
in the remote control and repeats daily
once set. For clock setting, please refer to
Quick Guide.
2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time.
How to use
To enjoy freshness and cleaner environment
• Press to communicate with the home wireless LAN access point.
• Wireless LAN LED
blinks to indicate the connection status to home access point.
Fast blink The unit is establishing the connection.
Slow blink The unit is not securing the connection.
No blink (stays on) The unit has established the connection.
• It can establish the connection to the unit even if the unit is turned OFF.
To connect network
• This operation provides clean air, moisturises your skin and hair, deodorizes odours in the
room.
• This operation can be activated when the unit is turn on or off by pressing the nanoe™X
button. During nanoe™X individual operation, the fan speed will be based on remote control
setting.
• If nanoe™X is activated before the unit is turn off, nanoe™X operation will resume once the
unit is turn on, this includes to ON Timer.
To Next Page
Loading...
Need help?
General
