Why is my Panasonic Air Conditioner HEAT/COOL mode not working efficiently?
If your Panasonic Air Conditioner isn't working efficiently in HEAT/COOL mode, make sure to set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
What to do if my Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped and verify if any timers have been set.
Why is my Panasonic CS-HZ25UKE Air Conditioner remote control not working?
If the remote control for your Panasonic Air Conditioner isn't working, first ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
Why Panasonic CS-HZ25UKE Air Conditioner unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, make sure the receiver is not obstructed. Note that certain fluorescent lights might interfere with the signal transmitter.
Why POWER indicator blinks during HEAT mode with no warm air supply in Panasonic Air Conditioner?
The POWER indicator on your Panasonic Air Conditioner may blink during HEAT mode with no warm air because the unit is in defrost mode and the AIR SWING is set to AUTO.
Why Panasonic Air Conditioner POWER indicator blinks and stops when operating in COOL/DRY mode?
The POWER indicator on your Panasonic Air Conditioner may blink and stop when operating in COOL/DRY mode because the system has locked to operate in HEAT mode only.
Why is the TIMER indicator always on on my Panasonic Air Conditioner?
The TIMER indicator on your Panasonic Air Conditioner is always on because the timer setting repeats daily once set.
Why outdoor unit of my Panasonic CS-HZ25UKE emits water/steam?
When your Panasonic Air Conditioner's outdoor unit emits water or steam, it is due to condensation or evaporation occurring on the pipes.
Why is operation delayed after restarting my Panasonic CS-HZ25UKE Air Conditioner?
The operation of your Panasonic Air Conditioner might be delayed a few minutes after restarting as a protection mechanism for the unit’s compressor.
Why does the indoor fan stop during heating operation in my Panasonic CS-HZ25UKE?
The indoor fan of your Panasonic Air Conditioner might stop occasionally during heating operation to avoid unintended cooling effect.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.50 |
| Power Supply | 230 V, 50 Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 542 x 289 mm |
| Energy Efficiency Ratio (Cooling) | 3.50 |
| Noise Level (Indoor) | 19 dB(A) |
To Next Page
