31
English
Cleaning instructions
To ensure optimal performance of the
unit, cleaning has to be carried out at
regular intervals. Dirty unit may cause
malfunction and you may see error code
“H 99”. Please consult authorised dealer.
• Switch off the power supply and unplug
before cleaning.
• Do not touch the aluminium fi n, sharp parts
may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use only soap ( pH 7) or neutral
household detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be
cleaned periodically by
authorised dealer.
Outdoor unit
Clean debris that surround the
unit.
Clear any blockage from the
drain pipe.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Insert into the unit
Front panel
Wash gently and dry.
Remove the front panel Close it securely
Release the hooks at both ends.
Pull out and lift up.
1
2
Insert at both sides.
1
Press both ends and center of the front panel.
3
Close down.
2
Indoor unit
Aluminium fi n
Front panel
Air fi lters
To learn more... / Cleaning instructions
To Next Page
Loading...
Need help?
General
