12
FAN SPEED
AIR SWING
MODE
TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
1
2
3
OFF
TIMER
ON
TIMER
AUTO
COOL
DRY
FAN
SPEED
AIR
SWING
SET CLOCK RESET
FF/
ET
AN
E
FF
CL
C
Remote control display
MODE
To select operation mode
AUTO mode - For your convenience
• Unit selects the operation mode according to
the room temperature.
• Once AUTO mode is selected, the unit will
operate at the standard setting temperature.
Room
temperature
Operation
mode
Standard setting
temperature
23˚C & above COOL 25˚C
Below 23˚CDRY 22˚C
• Press for “HI” to +2˚C or for “LO” to
-2˚C to the standard setting temperature.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
How to use
To adjust horizontal airfl ow direction
• Manually adjustable.
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then release.
• Press the button again to turn
off.
Press to restore the
remote control to
default setting.
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Not used in normal
operations.
Remote control receiver
and indicator
POWER
(Green)
TIMER
(Orange)
F568850_YA0113-1.indb 12F568850_YA0113-1.indb 12 1/21/2013 1:52:47 PM1/21/2013 1:52:47 PM