To Next PageTo Next PageHow to check for insufficient refrigerant in my Panasonic CS-PC12KKF?
To check for insufficient refrigerant (due to gas leakage) in your Panasonic Air Conditioner, carry out the measurements of pressure, electric current, and temperature fifteen minutes after an operation is started.
General| Brand | Panasonic |
|---|---|
| Model | CS-PC12KKF |
| Category | Air Conditioner |
| Language | English |
General safety precautions and warnings for servicing the air conditioner.
Detailed technical specifications for indoor and outdoor units.
Highlights key features including piping, remote control, quality and operation improvements.
Identifies controls and components of the indoor unit.
Identifies controls and components of the outdoor unit.
Details the controls and functions of the remote control.
Provides dimensional drawings and measurements for the indoor unit.
Provides dimensional drawings and measurements for the outdoor unit.
Illustrates the refrigerant flow and components in the system.
Shows the block diagram for the CS-PC12KKF model.
Shows the block diagrams for CS-PC18KKF and CS-PC24KKF models.
Wiring diagram for CS-PC12KKF indoor and CU-PC12KKF outdoor units.
Wiring diagram for CS-PC18KKF indoor and CU-PC18KKF outdoor units.
Wiring diagram for CS-PC24KKF indoor and CU-PC24KKF outdoor units.
Electronic circuit diagram for the CS-PC12KKF model.
Electronic circuit diagrams for CS-PC18KKF and CS-PC24KKF models.
Details of main, power, and indicator printed circuit boards for the indoor unit.
Guidance on choosing optimal locations for indoor and outdoor unit installation.
Step-by-step guide for installing the indoor unit, including mounting, piping, and wiring.
Steps for installing the outdoor unit, connecting piping, and evacuation.
Describes the cooling mode operation and its time diagram.
Details the soft dry mode operation and its time diagram.
Explanation of automatic operation mode based on intake air temperature.
Covers fan speed charts, auto control, and operational details.
Details auto and manual control for vertical airflow direction louvers.
Manual adjustment of horizontal airflow louvers.
Explains how to set and use ON and OFF timers for operations.
Control for automatic restart after power failure.
Describes sounds associated with remote control signal reception.
Details time delay safety control for compressor restart after stops.
Explains the 7-minute time save control for humidity reduction.
Operation ensures compressor runs for at least 60 seconds upon startup.
Manages starting current by delaying indoor fan operation.
Protects the indoor heat exchanger from freezing by controlling compressor operation.
Prevents reverse compressor rotation during power failures.
Controls to prevent dew formation at the indoor unit discharge area.
Using the Auto OFF/ON button for auto operation, test runs, and setting modes.
Details for SET, CLOCK, RESET, and TIMER buttons in servicing context.
Troubleshooting based on refrigeration cycle conditions like pressure and temperature.
Procedures for removing front grille, controllers, discharge grille, fan, and motor.
Procedures for removing indoor unit parts for CS-PC18KKF and CS-PC24KKF models.
Graphs showing thermostat settings versus intake air temperature for cooling and soft dry.
Performance data graphs for cooling operation by model (PC12KKF, PC18KKF, PC24KKF).
Charts detailing indoor and outdoor fan speeds and airflow.
Tables showing cooling capacity performance under various conditions for PC12KKF.
Graphs showing sound pressure level vs. frequency for PC18KKF and PC24KKF.
Exploded diagrams and part lists for the indoor unit models.
Exploded diagrams and part lists for CU-PC12KKF and CU-PC18KKF outdoor units.
