Why is my Panasonic CS-RE12NKE Air Conditioner outdoor unit emitting water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why does my Panasonic CS-RE12NKE Air Conditioner start automatically after a power failure?
The Panasonic Air Conditioner is equipped with an Auto Restart function. If the power is interrupted and then restored, the unit will automatically resume operation using the previous settings (operation mode and air flow direction), as long as the operation was not stopped by remote control.
Why does mist emerge from my Panasonic Air Conditioner indoor unit?
The mist emerging from the indoor unit of your Panasonic Air Conditioner is a condensation effect that occurs due to the cooling process.
Why is there a delay when I restart my Panasonic CS-RE12NKE Air Conditioner?
The operation delay after restarting your Panasonic Air Conditioner is a built-in protection mechanism for the unit's compressor.
Why does my room have a peculiar odor when using my Panasonic Air Conditioner?
The peculiar odor in the room when using your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
Why does the indoor fan stop sometimes on my Panasonic CS-RE12NKE during automatic fan speed?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove surrounding odors.
Safety warnings for indoor and outdoor units, including handling and installation.
Safety precautions related to the remote control, especially concerning children.
Safety guidelines for the power cord, plug, and electrical connections.
Guide to setting the 12-hour timer for automatic ON/OFF operations.
Guidance on cleaning, washing, drying, and replacing air filters.
Instructions for vacuuming or replacing the anti-bacterial filter.
Checks for inefficient heating or cooling operation.
Troubleshooting steps when the remote control is not functioning.
Checks for issues with signal reception from the remote.
Procedure to retrieve error codes when the unit stops with blinking timer light.
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 9 kg |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 289 mm |
| Noise Level (Indoor) | 40 dB(A) (High) / 28 dB(A) (Low) |
| Noise Level (Outdoor) | 50 dB(A) |
To Next Page
