B
baldwinmichealAug 6, 2025
Why is the gas side pressure high in my Panasonic Air Conditioner?
- JJohn LewisAug 6, 2025
High gas side pressure in your Panasonic Air Conditioner can be caused by an inefficient compressor or insufficient refrigerant.
To Next PageTo Next PageWhy is the gas side pressure high in my Panasonic Air Conditioner?
High gas side pressure in your Panasonic Air Conditioner can be caused by an inefficient compressor or insufficient refrigerant.
Why is the electric current higher than specified during operation of my Panasonic Air Conditioner?
If the electric current is higher than specified during the operation of your Panasonic Air Conditioner, it could be due to a dusty condenser. Consider measuring electric current during operation.
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R410A |
| Indoor Unit Weight | 9 kg |
| Noise Level (Outdoor Unit) | 48 dB |
| Air Flow (Indoor Unit) | 10.3 m³/min |
Explains the meaning of warning symbols used throughout the manual.
Safety guidelines for handling and using the remote control.
Safe practices for electrical connection and power usage.
Crucial safety advice for operating and interacting with the indoor unit.
Important safety instructions for the outdoor unit.
Defines the recommended temperature ranges for indoor and outdoor operation.
Information on environmentally sound collection and disposal of electronic waste.
Instructions on how to turn the air conditioner unit on and off manually.
Guide on adjusting the desired temperature for heating or cooling.
How to choose between Auto, Heat, Cool, and Dry operating modes.
How to select one of the five fan speed settings for optimal airflow.
Adjusting the vertical louvers for proper air distribution.
Using special modes for rapid cooling/heating and quiet operation.
Setting the timer for automatic unit start or stop operations.
Guidelines for cleaning the air conditioner unit safely and effectively.
Procedures for cleaning and replacing the Super Alleru-Buster and Air filters.
Steps to perform before restarting the unit after an extended period.
Conditions requiring power interruption and contacting a dealer.
Explains common sounds and appearances that are not malfunctions.
List of checks to perform before contacting customer service for issues.
Procedure to retrieve and interpret error codes using the remote control.
Steps to set up the remote control by inserting batteries.
Instructions for selecting mode, starting/stopping, and setting temperature.
