Why is the gas side pressure high in my Panasonic CS-RE9JKE?
- TTeresa AcostaJul 31, 2025
High gas side pressure in your Panasonic Air Conditioner can be caused by an inefficient compressor or insufficient refrigerant.
Why is the gas side pressure high in my Panasonic CS-RE9JKE?
High gas side pressure in your Panasonic Air Conditioner can be caused by an inefficient compressor or insufficient refrigerant.
Why is the electric current higher than specified during operation of my Panasonic CS-RE9JKE?
If the electric current is higher than specified during the operation of your Panasonic Air Conditioner, it could be due to a dusty condenser. Consider measuring electric current during operation.
Brand | Panasonic |
---|---|
Model | CS-RE9JKE |
Category | Air Conditioner |
Language | English |
Safety precautions related to the remote control unit.
Safety precautions concerning the unit's power supply and connection.
Safety guidelines for operating and handling the indoor unit.
Safety guidelines for operating and handling the outdoor unit.
Defines the recommended operating temperature ranges for cooling and heating.
Instructions for switching the unit on/off and using the Auto ON/OFF button.
Guide on how to adjust the desired room temperature.
Instructions for choosing between Auto, Heat, Cool, and Dry modes.
Adjusting fan speed and vertical airflow direction for optimal comfort.
Utilizing Turbo and Quiet modes for rapid cooling or silent operation.
Setting, confirming, and cancelling automatic timers for operation.
Guidelines for safely cleaning the air conditioner unit and its parts.
Procedures for cleaning air filters and checking unit components.
Checks before resuming operation after long standby and shutdown criteria.
Common symptoms that are not indicative of a malfunction, with their causes.
Steps to check before contacting customer service for assistance.
Procedure to identify and interpret error codes displayed by the unit.
Instructions for inserting batteries and preparing the remote control.
Essential steps for selecting mode, temperature, and powering the unit.