What to do if the Panasonic CS-RE9QKE remote control is not working?
If the remote control for your Panasonic Air Conditioner isn't working, start by inserting the batteries correctly. If that doesn't solve the issue, try replacing the batteries with new ones.
How to improve the efficiency of HEAT/COOL mode on my Panasonic CS-RE9QKE?
If your Panasonic Air Conditioner isn't operating efficiently in HEAT/COOL mode, make sure you've set the temperature correctly. Additionally, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why is my Panasonic CS-RE9QKE not receiving the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, ensure that there are no obstructions blocking the transmitter. Also, be aware that certain fluorescent lights may interfere with the signal.
Why does my Panasonic CS-RE9QKE show a total running current protection error?
Total running current protection can occur due to several reasons. It might be due to compressor failure, which requires checking and repairing the compressor. It could also be caused by a defective outdoor unit PCB or a defective inverter main circuit electrolytic capacitor, in which case, replacing the PCB or capacitor is necessary. Finally, excessive refrigerant can also trigger this protection; therefore, refrigerant levels should be checked.
How to fix indoor/outdoor abnormal communication in Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays an indoor/outdoor communication error, it could be due to a faulty indoor or outdoor unit PCB, which necessitates checking the wire terminal or the main PCB. Another cause might be a signal transmission error because of wiring issues between the indoor and outdoor units; in this case, inspect and repair the wiring.
What to do if my Panasonic Air Conditioner shows indoor/outdoor capacity rank mismatched error?
Indoor/outdoor capacity rank mismatch in your Panasonic Air Conditioner can occur due to several reasons. It might be because of wrong models interconnected, so you should check model compatibility. It could also be caused by wrong indoor unit or outdoor unit PCBs mounted, defective PCBs, wrong wiring, or broken wires in the connection. Inspect and verify PCB installations, replace faulty PCBs, correct wiring errors, or repair disconnections to resolve the issue.
Why is the indoor fan motor locked in my Panasonic CS-RE9QKE Air Conditioner?
If your Panasonic Air Conditioner's indoor fan motor is locked, it could be due to a short circuit or broken wire inside the fan motor winding, broken fan motor lead wires, Hall IC malfunction, or a faulty indoor unit PCB. Repair the fan motor or wire, inspect and repair the lead wires, replace the Hall IC, or replace the PCB.
What causes outdoor current transformer abnormality in Panasonic Air Conditioner?
If your Panasonic Air Conditioner shows an outdoor current transformer abnormality, it may be due to a lack of gas, a broken CT (current transformer), or a broken outdoor PCB. To address this, check refrigerant levels, replace the CT, or inspect/replace the PCB.
What does compressor temperature sensor abnormality mean on my Panasonic CS-RE9QKE?
If your Panasonic Air Conditioner displays a compressor temperature sensor abnormality, it could be due to a faulty connector connection, a faulty sensor, or a faulty PCB. Check and reconnect the connector, replace the sensor, or replace the PCB to resolve this.
What does indoor intake air temperature sensor abnormality mean on my Panasonic CS-RE9QKE Air Conditioner?
If your Panasonic Air Conditioner displays an indoor intake air temperature sensor abnormality, it could be due to a faulty connector connection, a faulty sensor, or a faulty PCB. Check and reconnect the connector, replace the sensor, or replace the PCB to resolve this.
How to start, stop, and select modes for the unit.
Safety guidelines for the indoor and outdoor units.
Safety warnings regarding the power supply cord.
Details on AUTO, HEAT, COOL, and DRY operating modes.
Common occurrences that are not malfunctions and their causes.
Conditions that require professional service and dealer consultation.
General| Type | Air conditioner indoor unit |
|---|---|
| Multi-split | No |
| Product color | White |
| Hose length (max) | 15 m |
| Inverter technology | Yes |
| Refrigerating medium | R410A |
| Dehumidifying capacity | 1.5 l/h |
| Air conditioner functions | Cooling, Dehumidifying, Heating |
| Seasonal efficiency rating (cooling) (SEER) | 6.10 |
| Seasonal efficiency rating (heating) (SCOP) (Average heating season) | 4.00 |
| Current | 16 A |
| AC input voltage | 230 V |
| Energy efficiency class (cooling) | A++ |
| Annual energy consumption (cooling) | 143 kWh |
| Hourly energy consumption (cooling) | 0.67 kWh |
| Hourly energy consumption (heating) | 0.8 kWh |
| Energy efficiency class (heating) (Average heating season) | A+ |
| Annual energy consumption (heating) (Average heating season) | 840 kWh |
| Indoor unit type | Wall-mountable |
| Indoor unit depth | 214 mm |
| Indoor unit width | 870 mm |
| Indoor unit height | 290 mm |
| Indoor unit weight | 9000 g |
| Indoor units quantity | 1 |
| Cooling airflow (indoor unit) | 702 m³/h |
| Heating airflow (indoor unit) | 768 m³/h |
| Indoor unit noise level (high speed) | 57 dB |
To Next Page
