To Next PageTo Next PageWhy does my Panasonic CS-RE9PKE-3 Air Conditioner outdoor unit emits water/steam?
The emission of water or steam from your Panasonic Air Conditioner's outdoor unit is due to condensation or evaporation occurring on the pipes.
Why is my Panasonic CS-RE9PKE-3 Air Conditioner remote control not working?
If the Panasonic Air Conditioner remote control isn't working, start by ensuring the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries with new ones.
How to improve cooling/heating efficiency in my Panasonic Air Conditioner?
If your Panasonic Air Conditioner's COOL/HEAT mode isn't working efficiently, make sure to set the temperature correctly and close all doors and windows. Additionally, clean or replace the filters and clear any obstructions at the air inlet and outlet vents.
What to do if my Panasonic CS-RE9PKE-3 Air Conditioner does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, ensure that nothing is obstructing the receiver. Note that certain fluorescent lights may interfere with the signal transmitter; please consult an authorized dealer for assistance.
What causes Indoor/Outdoor abnormal communication in a Panasonic CS-RE9PKE-3?
Abnormal communication between the indoor and outdoor units can be caused by the connecting cable or issues with the indoor/outdoor PCB.
What causes Indoor fan motor mechanism lock in Panasonic Air Conditioner?
A locked indoor fan motor mechanism can be caused by the indoor PCB or the fan motor itself.
Why does my Panasonic Air Conditioner operation is delayed a few minutes after restarting?
The delay you're experiencing after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does my Panasonic Air Conditioner unit operate automatically when power is resumed after a power failure?
The automatic operation of your Panasonic Air Conditioner after a power failure is due to the Auto Restart function of the unit.
Why is mist emerging from my Panasonic Air Conditioner indoor unit?
The mist coming from your Panasonic Air Conditioner's indoor unit is a condensation effect caused by the cooling process.
Why does my Panasonic CS-RE9PKE-3 make a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is caused by the expansion and contraction of the unit due to temperature changes.
General| Indoor unit type | Wall-mountable |
|---|---|
| Indoor unit weight | 8000 g |
| Indoor units quantity | 1 |
| Cooling airflow (indoor unit) | 750 m³/h |
| Heating airflow (indoor unit) | 666 m³/h |
| Indoor unit dimensions (WxDxH) | 848 x 213 x 290 mm |
| Type | Air conditioner indoor unit |
| Ionizer | - |
| Remotely operated | Yes |
| Refrigerating medium | R410A |
| Cooling capacity (max) | - BTU/h |
| Dehumidifying capacity | 1.4 l/h |
| Timer duration (maximum) | 12 h |
| Air conditioner functions | Cooling, Dehumidifying, Heating |
| Cooling capacity in watts (max) | 3000 W |
| Cooling capacity in watts (min) | 900 W |
| Heating capacity in watts (max) | 4100 W |
| Cooling energy efficiency (EER, W/W) | 3.57 |
| Heating energy efficiency (COP, W/W) | 4.02 |
| Seasonal efficiency rating (cooling) (SEER) | 5.6 |
| Seasonal efficiency rating (heating) (SCOP) (Average heating season) | 3.4 |
| Noise level (low speed) | 22 dB |
| Noise level (high speed) | 58 dB |
| Noise level (medium speed) | 42 dB |
| Power requirements | 230V, 16A |
| Annual energy consumption | 156 kWh |
Guide on how to insert batteries into the remote control.
Instructions for setting the timer function on the remote control.
Steps for basic operation, including mode and temperature selection.
Explains the meaning of warning and caution symbols used in the manual.
Safety guidelines for operating the indoor and outdoor units.
Safety measures related to the use of the remote control.
Precautions concerning the electrical power supply and connection.
Instructions for turning the unit on/off, setting temperature, and fan speed.
Details on selecting operation modes (AUTO, HEAT, COOL, DRY) and special settings.
Guidance on adjusting horizontal and vertical airflow directions.
How to use the timer functions and the auto OFF/ON button.
Recommended temperature ranges for cooling and heating operations.
Instructions for cleaning the indoor unit's front panel and air filters.
Checks to perform before seasonal use or after extended non-use.
Lists common symptoms that are not malfunctions and their causes.
Checks to perform before contacting a service dealer for issues.
Instructions on how to retrieve error codes using the remote control.
Detailed technical data including power, capacity, noise level, and dimensions.
Important notes regarding standby power, piping length, and air filters.
Information on the collection and disposal of old equipment and used batteries.
