Panasonic CS-RE9PKE-3 - Quick Guide; Inserting the Batteries; Timer Setting; Basic Operation

Quick guide
Inserting the batteries
2
1
Remove the battery cover
2
Insert AAA or R03 batteries
1
(can be used ~ 1 year)
3
3
Close the cover
TIMER setting
2
1
Press SELECT
1
2
Set the time
SELECT
SET/CANCEL 3
3
Confirm
Basic operation
1 Select the desired mode
AUTO
HEAT
COOL
DRY
2
1
3
2
Start/stop the operation
POWER
• Please note that the OFF indication is
as follows:
To start:
To stop:
3 Select the desired temperature
• Selection range : 16°C ~ 30°C.
• Operating the unit within the
recommended temperature may save
8m
energy.
HEAT: 20°C ~ 24°C .
COOL: 26°C ~ 28°C.
DRY
: 1°C ~ 2°C lower than room
temperature.
• Use remote control within 8m from the remote
control receiver of the indoor unit.
The illustrations in this manual are for
explanation purposes only and may differ from
the actual unit. They are subject to change
without notice for future improvement.
2