To Next PageTo Next PageWhy is my Panasonic CS-RZ25WKEW HEAT/COOL mode not working efficiently?
If your Panasonic Air Conditioner isn't working efficiently in HEAT/COOL mode, ensure that you have set the temperature correctly, and that all doors and windows are closed. You should also clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
What to do if Panasonic CS-RZ25WKEW Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped. Also, verify whether any timers have been set.
What to do if Panasonic CS-RZ25WKEW remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, first ensure that the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
Why is the TIMER indicator always on on my Panasonic CS-RZ25WKEW?
If the TIMER indicator on your Panasonic Air Conditioner is always on, it means the timer setting repeats daily once set.
Why does my Panasonic CS-RZ25WKEW Air Conditioner outdoor unit emit water/steam?
If the outdoor unit of your Panasonic Air Conditioner emits water or steam, it is due to condensation or evaporation occurring on the pipes.
Why is my Panasonic CS-RZ25WKEW Air Conditioner noisy during operation?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline. Also, make sure that the front panel is closed properly.
Why does Panasonic CS-RZ25WKEW Air Conditioner POWER indicator blink before the unit is switched on?
If the POWER indicator on your Panasonic Air Conditioner blinks before the unit is switched on, this indicates a preliminary step in preparation for operation when the ON timer has been set. When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
What does it mean when Panasonic Air Conditioner POWER indicator blinks during HEAT mode?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode with no warm air supply and the flap is closed, the unit is in defrost mode, and AIR SWING is set to AUTO.
Why is Panasonic Air Conditioner operation delayed a few minutes after restarting?
If your Panasonic Air Conditioner operation is delayed a few minutes after restarting, this delay is a protection mechanism for the unit’s compressor.
Why does Panasonic CS-RZ25WKEW indoor fan stop during heating?
The indoor fan of your Panasonic Air Conditioner might stop occasionally during heating operation to avoid unintended cooling effect.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 8 kg |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Noise Level (Indoor) | 19 dB |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 290 mm |
Important warnings regarding appliance use by children and qualified personnel.
Guidelines for preventing electrical hazards like overheating and shock.
Safety guidelines for handling and installing units with R32 refrigerant.
Critical safety measures for installing refrigerating systems and piping.
Specific installation rules for products with flammable refrigerants, including room size and piping.
Essential safety measures to minimize ignition risks during work on systems.
Procedures for checking for refrigerant presence and handling leaks.
Ensures fire extinguishers are available and ignition sources are managed.
Safety measures for repairing sealed components, including electrical isolation.
Prohibitions on using ignition sources for detecting flammable refrigerant leaks.
Guidelines for leak detection methods and equipment for all refrigerant systems.
Procedures for safely removing and evacuating refrigerant from the system.
Requirements for safe and correct refrigerant charging into the system.
Steps and precautions for safely decommissioning the air conditioning system.
Detailed steps and safety checks for recovering refrigerant from systems and equipment.
Lists common symptoms that do not indicate a malfunction and their likely causes.
