Why is my Panasonic Air Conditioner HEAT/COOL mode not working efficiently?
If the HEAT/COOL mode on your Panasonic Air Conditioner isn't working efficiently, make sure you have set the temperature correctly. Ensure all doors and windows are closed to maintain the desired temperature. Clean or replace the filters to ensure proper airflow. Clear any obstructions at the air inlet and outlet vents.
What to do if my Panasonic CS-RZ25WKRW Air Conditioner unit does not receive the signal from the remote control?
If the Panasonic Air Conditioner unit isn't receiving the signal from the remote control, first ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter. Consult an authorised dealer.
Why is my Panasonic CS-RZ25WKRW discharging dust?
Dust discharge may occur if dust has accumulated inside the indoor unit. Ensure that nanoe™ X is set to ON. If nanoe™ X is already ON, it may be considered abnormal, and you should contact your dealer.
What to do if my Panasonic CS-RZ25WKRW smells bad?
The unit inside is dirty and has accumulated odor components. Contact your dealer for assistance.
Why is my Panasonic Air Conditioner making noise during heating?
The noise you are hearing during heating operation is likely due to the defrost operation being in process.
What to do if the nanoe™X indicator is not ON when nanoe™X is activated in Panasonic Air Conditioner?
Use the remote control to retrieve the error code and consult an authorised dealer.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 800 x 290 x 215 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 290 mm |
| Weight (Outdoor Unit) | 30 kg |
| Type | Split |
| Noise Level (Indoor Unit) | 21 dB |
| Noise Level (Outdoor Unit) | 48 dB |
To Next Page