To Next PageTo Next PageHow do I fix F90 error (power factor correction) on my Panasonic CS-S12NKUA?
The F90 error on your Panasonic Air Conditioner relates to power factor correction protection. This can be caused by: * A DC voltage peak due to a power supply surge, so stabilize or replace the power supply. * A DC voltage peak due to non-uniform compressor windings, so inspect and service the compressor. * A faulty outdoor PCB, so replace it.
What does H16 error mean on Panasonic Air Conditioner?
The H16 error on your Panasonic Air Conditioner indicates an open circuit in the outdoor current transformer. This could be due to: * A defective current transformer, so replace it. * A defective outdoor PCB, so replace it. * A defective compressor (low compression), so inspect and replace the compressor if necessary.
How to fix F96 error related to IPM overheating in Panasonic Air Conditioner?
The F96 error on your Panasonic Air Conditioner indicates IPM overheating. This can be caused by: * A short circuit of hot discharge air flow, so inspect and resolve airflow issues. * A defective outdoor fan motor, so replace the outdoor fan motor. * A defective internal circuitry of the IPM, so replace the IPM. * A defective IPM temperature sensor, so replace the IPM temperature sensor.
What should I do if my Panasonic Air Conditioner displays H33 error?
The H33 error on your Panasonic Air Conditioner indicates an unspecified voltage issue between the indoor and outdoor units. This can be caused by: * Wrong models interconnected, so ensure compatible units are connected. * Wrong indoor and outdoor unit PCBs used, so check and replace incorrect PCBs. * A defective indoor or outdoor unit PCB, so test and replace defective PCBs.
What causes F97 error (compressor overheating) in Panasonic CS-S12NKUA Air Conditioner and how can I fix it?
The F97 error on your Panasonic Air Conditioner indicates compressor overheating. This can be due to: * Refrigerant shortage (refrigerant leakage), so check for refrigerant leaks and recharge. * A closed 2/3 way valve, so ensure the valve is open. * A detection error due to a faulty compressor tank temperature sensor, so replace the sensor.
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 11, 900 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Coefficient of Performance (COP) | 3.8 |
| Refrigerant | R-410A |
| Indoor Unit Weight | 9 kg |
Explains warning and caution symbols used for safety instructions and compliance.
Safety instructions specific to the indoor and outdoor units of the air conditioner.
Details the recommended operating temperature ranges for cooling and heating modes.
Lists power requirements, circuit breaker, and voltage for different models.
Precautions for remote control, including battery handling and child safety.
Guidelines for safe electrical connections, cord usage, and preventing hazards.
Instructions on using the power button to start or stop the air conditioner.
Guide to selecting AUTO, HEAT, COOL, or DRY modes for desired comfort.
How to select fan speed and control the airflow direction (louvers).
Engaging the quiet mode to reduce airflow noise for a more peaceful environment.
Utilizing the powerful mode for rapid temperature adjustment.
Instructions on how to set the timer for automatic ON/OFF operations.
Guidelines for cleaning the indoor unit, including the front panel and filters.
Information on cleaning and replacing air purifying and air filters.
How to use the unit's auto off/on button when the remote is lost or malfunctioning.
Common operational sounds and phenomena that do not signify a fault.
Steps to take to resolve common issues before contacting a service agent.
Procedure for using the remote control to identify and retrieve error codes.
Checks and procedures for units that have been idle for extended periods.
Information on collecting and disposing of used equipment and batteries.
FCC statement regarding interference and compliance with digital device regulations.
Step-by-step instructions for preparing the remote control for use.
Guide to using the MODE, OFF/ON, and TEMP buttons for basic air conditioner control.
