Panasonic CS-S12NKUA

12 pages

To Next Page

To Next Page

Loading...

QUICK GUIDE

QUICK GUIDE

ENGLISH

Before operating the unit, read these operating

instructions thoroughly and keep them for future

reference.

Operating Instructions

Air Conditioner

Model No.

Indoor Unit Outdoor Unit

CS-S9NKUA CU-S9NKUA

CS-S12NKUA CU-S12NKUA

F568315

© Panasonic Appliances Air-Conditioning Malaysia

Sdn. Bhd. 2012. Unauthorized copying and distribution

is a violation of law.

Table of Contents

Other manuals for Panasonic CS-S12NKUA

Service Manual74 pages

Information2 pages

Questions and Answers:

T
Terri HamiltonAug 27, 2025
Why does my Panasonic CS-S12NKUA Air Conditioner show F98 error and how to fix it?
- A
  Arthur Moreno PhDAug 27, 2025
  The F98 error on your Panasonic Air Conditioner indicates an input over current detection. This can occur due to: * Compressor failure, so inspect and replace the compressor if necessary. * A defective outdoor unit PCB, so replace it. * A defective inverter main circuit electrolytic capacitor, so replace it. * Excessive refrigerant, so check for proper refrigerant levels.
C
clarkphilipAug 25, 2025
How to troubleshoot H98 error related to high pressure in my Panasonic Air Conditioner?
- J
  John CastilloAug 26, 2025
  The H98 error indicates indoor high pressure protection. This may be due to: * A clogged air filter, so clean or replace it. * Dust accumulation on the heat exchanger, so clean it. * An air short circuit, so check for and eliminate it. * A faulty indoor pipe temperature sensor, so replace it. * A defective indoor unit PCB, so replace it.
R
Richard PorterAug 25, 2025
What does F91 error mean on my Panasonic Air Conditioner and how to fix it?
- T
  Thomas MorrisAug 25, 2025
  The F91 error on your Panasonic Air Conditioner signals a refrigeration cycle abnormality. This can be caused by: * A refrigerant shortage due to leaks, in which case you should check for leaks and recharge the system. * Poor compressor performance, so inspect the compressor. * A closed 2/3 way valve, so ensure the valve is open. * Faulty indoor intake air or pipe temperature sensors, so test and replace any faulty sensors.

Panasonic CS-S12NKUA Specifications

General

Type	Wall Mounted
Cooling Capacity	11, 900 BTU/h
Power Supply	220-240V, 50Hz
Coefficient of Performance (COP)	3.8
Refrigerant	R-410A
Indoor Unit Weight	9 kg

Related product manuals

Panasonic CS-S12NKUW-1

Panasonic CS-S12NKZW

Panasonic CS-S12KKQ

Panasonic CS-S12MKQ

Panasonic CS-S12RKV

Panasonic CS-S12TKV

Panasonic CS-S12JKQ

Preview: Panasonic CS-S12PKV

Panasonic CS-S12PKV

Panasonic CS-S12PKZW

Panasonic CS-S12TKZW

Panasonic CS-S12VKV-2

Preview: Panasonic CS-S10PKH

Panasonic CS-S10PKH