To Next PageTo Next PageWhy Panasonic CS-S18VKV-2 remote control does not work?
If your Panasonic Air Conditioner's remote control isn't working, make sure the batteries are correctly inserted or replace them with new ones if they are weak. The display might be dim, or the transmission signal could be weak due to depleted batteries.
What to do if my Panasonic CS-S18VKV-2 is not working?
If your Panasonic Air Conditioner isn't working, check if the circuit breaker has tripped or if any timers have been set.
How to dim the indicators on a Panasonic CS-S18VKV-2?
To dim the power indicator and the timer indicator on your Panasonic Air Conditioner (while extinguishing other indicators), press the button for 5 seconds. To restore the brightness of all indicators, repeat this procedure.
What to do if my Panasonic Air Conditioner operation in COOL mode is not working efficiently?
If the COOL mode on your Panasonic Air Conditioner isn't working efficiently: * Ensure the temperature is set correctly. * Close all doors and windows. * Clean or replace the filters. * Clear any obstructions from the air inlet and outlet vents.
What to do if my Panasonic Air Conditioner does not receive the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, first ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for further assistance.
Why Panasonic CS-S18VKV-2 is noisy during operation?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline or ensure the front panel is closed properly.
Why POWER indicator blinks before the Panasonic CS-S18VKV-2 Air Conditioner is switched on?
If the POWER indicator blinks before your Panasonic Air Conditioner is switched on, this is a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier than the set time to achieve the desired temperature on time.
What to do with Panasonic CS-S18VKV-2 if the units are not going to be used for a long period of time?
If your Panasonic Air Conditioner units are not going to be used for a long period of time: * Separately activate NANOE operation for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. * Turn off the power supply and unplug the unit. * Remove the remote control batteries.
Why TIMER indicator is always on in Panasonic CS-S18VKV-2 Air Conditioner?
The timer setting repeats daily once set on your Panasonic Air Conditioner.
General| Brand | Panasonic |
|---|---|
| Model | CS-S18VKV-2 |
| Category | Air Conditioner |
| Language | English |
General operating instructions for the air conditioner.
Covers general warnings, unit safety, and symbol explanations.
Specific safety guidelines for the units and remote control.
Precautions for safe use of the power supply and plug.
Additional safety guidelines for units and maintenance.
Further safety advice for the remote control.
Using i AUTO-X mode for rapid cooling.
Important steps before cleaning the unit.
Common operational behaviors that are not faults.
Steps to check before contacting a service technician.
Conditions requiring professional service.
Procedure to display and record error codes.
List of error codes and their corresponding abnormalities.
