Why is my Panasonic Air Conditioner making a water flowing sound during operation?
The water flowing sound you hear during the operation of your Panasonic Air Conditioner is due to the refrigerant flow inside the unit.
What to do if my Panasonic Air Conditioner stops and the timer indicator blinks?
Use the remote control to retrieve the error code.
What to do if Patrol sensor or e-ion indicator on the indoor unit of my Panasonic CS-S24KKQ is blinking?
Stop Patrol or e-ion operation then restart it. If the patrol sensor or e-ion indicator still blinking, please consult authorized dealer.
Why is there inconsistent air flow during PATROL operation in my Panasonic CS-S24KKQ?
The inconsistent airflow during PATROL operation in your Panasonic Air Conditioner is because the fan speed is adjusted automatically during patrol operation.
Why is my Panasonic CS-S24KKQ making a cracking sound during operation?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is caused by changes in temperature, leading to the expansion and contraction of the unit.
Why does the power indicator blink on my Panasonic CS-S24KKQ Air Conditioner before it is switched on?
The blinking power indicator on your Panasonic Air Conditioner before it's switched on is a preliminary step in preparation for operation when the ON timer has been set.
Why is there an operation delay after I restart my Panasonic CS-S24KKQ?
The delay you experience after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does my Panasonic CS-S24KKQ indoor fan stop occasionally during automatic fan speed setting?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to remove surrounding odours. Select QUIET operation to maintain consistent air flow.
Why does my Panasonic Air Conditioner have a peculiar odour?
A peculiar odour from your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
What to do if my Panasonic CS-S24KKQ cooling is not working efficiently?
If your Panasonic Air Conditioner isn't cooling efficiently, make sure you have set the temperature correctly. Also, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Specifies the operating temperature ranges for cooling mode.
Details warnings for safe electrical connections and power usage.
Cautions regarding the operation and handling of both unit types.
Precautions concerning remote control battery insertion and handling.
Instructions for turning the unit on and off using the remote.
Guide to adjusting the desired room temperature.
Explains how to choose between AUTO, COOL, and DRY modes.
Steps to modify the fan speed for comfort.
How to adjust the vertical and horizontal air swing direction.
Details on ECO PATROL and e-ion for energy efficiency and air quality.
Using modes to manage humidity and reduce operational noise.
Activating features for faster room temperature adjustment.
Guide to setting ON and OFF timers for automated operation.
Guidelines for safely cleaning the indoor unit and its components.
Procedure for removing and attaching the front panel for cleaning.
Instructions for cleaning e-ion filters and the generator.
Identifies common sounds or occurrences that are not malfunctions.
Essential checks to perform before contacting customer service.
Method for retrieving and interpreting error codes from the unit.
Steps for battery installation and clock configuration of the remote.
Quick start guide for mode selection, power, and temperature adjustment.
General| Type | Split System |
|---|---|
| Inverter | Yes |
| Power Supply | 220-240V, 50Hz |
| Cooling Capacity | 24000 BTU/h |
| Heating Capacity | 26000 BTU |
| Energy Efficiency Ratio (EER) | 3.3 W/W |
| Indoor Unit Dimensions (W x H x D) | 110.2 x 33 x 24.4 cm |
To Next Page
