Panasonic CS-S9NKR - User Manual

Panasonic CS-S9NKR

8 pages

To Next Page

To Next Page

Loading...

F568750

Operating Instructions

Air Conditioner

Model No.

Indoor Unit Outdoor Unit

CS-S9NKR CU-S9NKR

CS-S12NKR CU-S12NKR

CS-S18NKR CU-S18NKR

CS-S24NKR CU-S24NKR

CS-S28NKR CU-S28NKR

QUICK GUIDE

QUICK GUIDE

Before operating the unit, read these operating

instructions thoroughly and keep them for future

reference.

© Panasonic Appliances Air-Conditioning Malaysia

Sdn. Bhd. 2012. Unauthorized copying and distribution

is a violation of law.

Table of Contents

Other manuals for Panasonic CS-S9NKR

Service Manual124 pages

Questions and Answers:

R
Rachel GreenSep 18, 2025
What causes error F96 on my Panasonic CS-S9NKR?
- T
  Travis RobinsonSep 18, 2025
  Error F96 on your Panasonic Air Conditioner indicates IPM overheating. This can happen because: * The IPM overheats due to a short circuit of hot discharge air flow, so investigate outdoor air flow for obstructions. * The IPM overheats due to a defective outdoor fan motor, so inspect and replace the outdoor fan motor if defective. * The IPM overheats due to defective internal circuitry of the IPM, so check and replace the IPM if defective. * The IPM overheats due to a defective IPM temperature sensor, so inspect and replace the IPM temperature sensor.
A
Ashley LaneAug 25, 2025
What to do if my Panasonic CS-S9NKR unit does not work?
- C
  Connie RileyAug 25, 2025
  If your Panasonic Air Conditioner unit isn't working, check if the circuit breaker has tripped. Also, verify that no timers have been set.
P
Paul WilliamsAug 26, 2025
Why Panasonic CS-S9NKR unit does not receive signal from remote control?
- B
  Brooke HernandezAug 26, 2025
  If the Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorized dealer.
H
Henry FritzAug 26, 2025
Why does my Panasonic Air Conditioner show error F91?
- K
  Karen MendozaAug 27, 2025
  The F91 error in your Panasonic Air Conditioner indicates a refrigeration cycle abnormality. This can be due to several reasons: * A refrigerant shortage, potentially caused by refrigerant leakage, which requires locating and repairing the leaks. * Poor compression performance of the compressor, suggesting the compressor needs inspection and possible replacement. * A closed 2/3 way valve, which needs to be opened. * Faulty indoor intake air or indoor pipe temperature sensors, which should be inspected and replaced if defective.
C
Catherine CameronSep 18, 2025
What does error H25 mean on my Panasonic Air Conditioner?
- C
  Cynthia WilsonSep 18, 2025
  Error H25 on your Panasonic Air Conditioner indicates an abnormality in the e-ion air purifying system. This can be caused by: * A faulty indoor main PCB, so check and replace the indoor main PCB. * A faulty indoor e-ion power module, so inspect and replace the e-ion power module.
C
Cassandra SummersSep 23, 2025
How to fix a noisy Panasonic CS-S9NKR during operation?
- T
  Thomas AllisonSep 23, 2025
  If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline. Also, make sure the front panel is closed properly.
K
Kari TaylorSep 9, 2025
What does error H30 mean on my Panasonic CS-S9NKR Air Conditioner?
- S
  Sara Henderson MDSep 9, 2025
  Error H30 on your Panasonic Air Conditioner indicates an abnormality with the compressor discharge temperature sensor. This may be due to: * A faulty connector connection, so inspect and repair the connector. * A faulty sensor, so replace the compressor discharge temperature sensor. * A faulty PCB, so check and replace the PCB if defective.
B
Brandi JonesSep 10, 2025
What does error H14 mean on my Panasonic Air Conditioner?
- S
  Susan RhodesSep 10, 2025
  Error H14 on your Panasonic Air Conditioner indicates an abnormality with the indoor intake air temperature sensor. This can be caused by: * A faulty connector connection, so inspect and repair the connector. * A faulty sensor, so replace the indoor intake air temperature sensor. * A faulty PCB, so check and replace the PCB if defective.
A
Alyssa LoweSep 3, 2025
Why is my Panasonic CS-S9NKR showing error F93?
- J
  Jeffrey AndersonSep 3, 2025
  Error F93 on your Panasonic Air Conditioner indicates a compressor rotation failure. This can be caused by: * A disconnected compressor terminal, so reconnect the compressor terminal. * Outdoor PCB malfunction, so check and replace the outdoor PCB if defective.
O
Omar SummersSep 1, 2025
What does error code H12 mean on a Panasonic Air Conditioner?
- I
  Ian McdowellSep 1, 2025
  The H12 error code on your Panasonic Air Conditioner indicates a capacity rank mismatch between the indoor and outdoor units. This can be caused by: * Incompatible indoor and outdoor unit models being interconnected, so ensure compatible models are used. * Incorrect indoor or outdoor unit PCBs being mounted, requiring a check and replacement with the correct PCBs. * Defective indoor or outdoor unit PCBs, which should be inspected and replaced if found faulty. * Wiring errors between the indoor and outdoor units, which means you should verify and correct the wiring. * Broken wires in the connection wires between the units, so inspect and repair any broken wires.

Panasonic CS-S9NKR Specifications

General

Brand	Panasonic
Model	CS-S9NKR
Category	Air Conditioner
Language	English

Related product manuals

Panasonic CS-S9NKV

Preview: Panasonic CS-S9NKZW

Panasonic CS-S9NKZW

Preview: Panasonic CS-S9NKUA

Panasonic CS-S9NKUA

Preview: Panasonic CS-S9NKUW-1

Panasonic CS-S9NKUW-1

Preview: Panasonic CS-S9KKQ

Panasonic CS-S9KKQ

Preview: Panasonic CS-S9MKQ

Panasonic CS-S9MKQ

Preview: Panasonic cs-s9pkv

Panasonic cs-s9pkv

Preview: Panasonic CS-S9JKQ

Panasonic CS-S9JKQ

Preview: Panasonic CS-S9TKV

Panasonic CS-S9TKV

Preview: Panasonic CS-S9RKV

Panasonic CS-S9RKV

Preview: Panasonic CS-S9TKZW

Panasonic CS-S9TKZW

Preview: Panasonic Indoor Unit CS-S9PKR

Panasonic Indoor Unit CS-S9PKR