18
Cleaning the Air Conditioner
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve “H 99”
error code. Consult an authorised dealer.
• Before cleaning, switch off the power supply
and unplug the unit.
• Do not touch the aluminium fi n as the sharp
parts may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use soap (
pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Do handle the unit surface
with care to avoid scratches by
sharp or rough items
(e.g. fi ngernails, tools, rings,
etc). Wipe the unit gently with a
soft damp cloth.
The coils and fans should be cleaned
periodically by an authorised dealer.
Outdoor unit
Clean the debris that surround
the unit.
Clear any blockage from the
drain pipe.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damaging
the surface.
• Dry the fi lters thoroughly under a shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Remove from the unit
Insert into the unit
Indoor unit
AUTO
OFF/ON
nanoeX
Aluminium fi n
Front panel
Air fi lters
Front panel
Wash gently and dry.
How to remove front panel
1
Raise over
horizontal
level.
2
Pull upward.
Horizontal
Close it securely
AUTO
OFF/ON
nanoeX
1
Hold
horizontally.
2
Match and push in.
3
Close down.
4
Press both ends of the front panel.
To Next Page
Loading...
