S
stevencoleSep 2, 2025
What causes the water flowing sound in Panasonic CS-TZ25TKEW Air Conditioner during operation?
- VVanessa MillerSep 2, 2025
The water flowing sound during operation is due to the refrigerant flow inside the unit.
To Next PageTo Next PageWhat causes the water flowing sound in Panasonic CS-TZ25TKEW Air Conditioner during operation?
The water flowing sound during operation is due to the refrigerant flow inside the unit.
Why does mist emerge from my Panasonic CS-TZ25TKEW Air Conditioner indoor unit?
The mist emerging from the indoor unit is a condensation effect due to the cooling process.
Why is my Panasonic Air Conditioner making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature that lead to the expansion and contraction of the unit's components.
Why does the POWER indicator blink on my Panasonic CS-TZ25TKEW before it turns on?
The POWER indicator on your Panasonic Air Conditioner might blink before the unit is switched on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why is the cooling/heating capacity reduced on my Panasonic CS-TZ25TKEW at the lowest fan speed?
If you've noticed a reduction in cooling/heating capacity during the lowest fan speed setting on your Panasonic Air Conditioner, it's because the low fan speed prioritizes low noise operation, which can reduce cooling/heating capacity. To increase capacity, increase the fan speed.
Why Panasonic CS-TZ25TKEW Air Conditioner unit doesn't receive signal from remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for assistance.
How to reduce noise during Panasonic CS-TZ25TKEW Air Conditioner operation?
If your Panasonic Air Conditioner is noisy during operation, check whether the unit has been installed at an incline and ensure that the front panel is properly closed.
Why does my Panasonic Air Conditioner outdoor unit emit water or steam?
The outdoor unit emits water or steam because condensation or evaporation occurs on the pipes.
Why is the TIMER indicator always on in my Panasonic Air Conditioner?
The TIMER indicator is always on because the timer setting repeats daily once set.
What to do if Panasonic CS-TZ25TKEW remote control does not work?
If your Panasonic Air Conditioner unit isn't responding to the remote control, first ensure the batteries are correctly inserted or replace them if they are weak.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Seasonal Energy Efficiency Ratio (SEER) | 6.6 |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (WxHxD) | 799 x 290 x 197 mm |
| Outdoor Unit Dimensions (WxHxD) | 780 x 542 x 289 mm |
| Weight (Indoor Unit) | 8 kg |
| Type | Split System |
| Noise Level (Indoor) | 20 dB(A) |
| Noise Level (Outdoor) | 48 dB(A) |
General warnings for indoor/outdoor units, including child safety and installation hazards.
Safety guidelines for remote control and power supply, including cord handling and grounding.
Specific safety measures for appliances using R32 refrigerant, installation, and handling.
Lists common symptoms and their likely causes, not indicating malfunction.
Actions to take to check for issues before contacting a service agent.
Instructions on how to retrieve error codes using the remote control.
A list of diagnostic displays and their corresponding abnormalities or protections.
