EasyManua.ls Logo

Panasonic CS-U18RKR - Cleaning Instructions

Panasonic CS-U18RKR
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER
QUIET
POWERFUL
ECONOMY
i AUTO-X
TIMER
9
English
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code “H99”. Please
consult authorised dealer.
Switch off the power supply and unplug before
cleaning.
Do not touch the aluminium n, sharp parts may
cause injury.
Do not use benzine, thinner or scouring powder.
Use only soap (
pH 7) or neutral household
detergent.
Do not use water hotter than 40 °C.
To learn more... / Cleaning instructions
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain
pipe.
Front panel
Wash gently and dry.
Remove the front panel
Raise
1
POWER
QUIET
POWERFUL
ECONOMY
i AUTO-X
TIMER
Pull out
2
Close it securely
POWER
QUIET
POWERFUL
ECONOMY
i AUTO-X
TIMER
Insert at both sides1
2
Close down
3
Press both ends of the front panel
4
Press at center of the front panel.
Indoor unit
Aluminium nFront panel
Air lters Anti-bacterial lter
Air lters
Every 2 weeks
• Wash/rinse the lters gently
with water to avoid damage to
the lter surface.
• Dry the lters thoroughly under shade, away from
re or direct sunlight.
Replace any damaged lters.
Remove air lter Attach air lter
Insert into the unit
Anti-bacterial lter
Anti-bacterial lter.
• Clean the lter whenever necessary.
• Wash/rinse the lter gently with water to avoid
damage to the lter.
• Dry the lter thoroughly under the shade, away from
re or direct sunlight.
• Replace the lter every 10 years or replace any
damaged lter. Part no.: CZ-SA22P
For seasonal inspection after extended non-use
Checking of remote control batteries.
No obstruction at air inlet and air outlet vents.
Use Auto OFF/ON button to select COOL
operation. After 15 minutes of operation, it
is normal to have the following temperature
difference between air inlet and air outlet vents:
COOL: 8 °C
For extended non-use
Turn off the power supply and unplug.
Remove the remote control batteries.
F570022-SA0815-2_EN.indd 9F570022-SA0815-2_EN.indd 9 17/08/2015 2:46:09 PM17/08/2015 2:46:09 PM
Process BlackProcess Black

Related product manuals