6
REMOTE CONTROL
INDICATOR
PATROL SENSOR
(Red/Orange/Blue)
POWER
(Green)
TIMER
(Orange)
(Green)
AUTO COMFORT
(Green)
(Blue)
POWERFUL/QUIET
(Orange)
Maximum
distances: 8m
Human activity
sensor
FAN SPEED
AIR SWING
PAT
ROL/
POW
ERFUL/
QUIET
MODE
A.COMFORT
TEMP
TIMER
SET
CANCEL
ON
OFF
1
2
3
SET CLOCK RESET
OFF/ON
OFF
TIMER
ON
TIM
ER
FAN
SPE
ED
AIR
SWING
AUTO
HEAT
COOL
DRY
3
6
4
2
5
1
Remote
Control display
8
7
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• For heat, cool and dry modes, the range of temperature
for selection is 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
Room
temperature
Operation mode
Standard setting
temperature
23˚C & above Cool 25˚C
Below 23˚C Dry 22˚C
Below 20˚C Heat 21˚C
• Press
for “HI” to +2˚C or for “LO” to -2˚C to the
standard setting temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
TO SELECT FAN SPEED (3 OPTIONS)
FAN
PEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
To Next Page
Loading...
Need help?
General
