8
TIMER
SET
CANCEL
ON
OFF
1
2
3
SET CLOCK RESET
REMOTE CONTROL
9
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
10
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
11
Press to restore the remote control’s default setting.
12
Not used in normal operations.
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
OFF
1
2
ET
Select ON or
OFF timer
Set the time Confi rm
• To cancel ON or OFF timer, press
N
or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 30 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET
.
9
10
11
12
To Next Page
Loading...
Need help?
General
