8 Operation Details
8.1. Heating Operation
•
Heating operation can be set using remote control.
•
This operation is applied to warm the room temperature reaches the setting temperature set on the remote control.
•
The remote control setting temperature, which takes the reading of intake air temperature sensor, can be adjusted from 16°C
to 30°C.
•
During heating operation, the compressor will stop running and restart as shown in below figure.
8.1.1. Heating Operation Time Diagram
20
CS-W7DKE CU-W7DKE / CS-W9DKE CU-W9DKE / CS-W12DKE CU-W12DKE
To Next Page
Loading...
