Panasonic CS-XE12SKUA-1 - Basic Operation

3
Table of contents
Safety precautions ………… 4-5
How to use
……………………… 6-7
To learn more
………………… 8-9
Cleaning instructions
……… 10
Troubleshooting
………… 11-13
Information………………… 14
Accessories
• Remote control
• AAA or R03 batteries × 2
• Remote control holder
• Screws for remote control
holder × 2
The illustrations in this manual are for
explanation purposes only and may differ
from the actual unit. They are subject
to change without notice for future
improvement.
Thank you for purchasing
Panasonic Air Conditioner.
B
Basic operation
1
Press
MODE
to select
the desired mode.
DRY
AUTO HEAT
COOLFAN
2
Press
OFF/ON
to
start/stop the
operation.
POWER
• Please note that
the
indication
is on display to
start the unit.
3
Select the desired
temperature.
Up
Down
TEMP
Selection range (Not
applicable for FAN mode):
60 °F ~ 86 °F / 16 °C ~ 30 °C.
• Press and hold
for
approximately 10 seconds
to switch the temperature
indication in °F or °C.
English