EasyManua.ls Logo

Panasonic CS-XE15WKUAW - 17 Disassembly and Assembly Instructions; Cs-Xe9 Wkuaw Cs-Xe12 Wkuaw Cs-Xe15 Wkuaw; To Remove Horizontal Vane and Front Grille

Panasonic CS-XE15WKUAW
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
119
17. Disassembly and Assembly Instructions
WARNING
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
17.1 CS-XE9WKUAW CS-XE12WKUAW CS-XE15WKUAW
17.1.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
17.1.1.1 To Remove Horizontal Vane and Front Grille
Figure 1
Figure 2
1. Lift to open horizontal vane gently.
3. Remove the 2 caps and 2 screws on the front frille.
2. Slide the lever from locked position into release position
and remove the horizontal vane.
Slightly lift this shape
by finger to move lever
Lever
LOCKED position
RELEASED position
Screw
Slide this lever to left to release
When reinstalling the front grille, carry out
above step 2 - 3 in the reverse order.
* When remove the screw, ensure opposite side of vane is
supported to prevent vane damage by over push.
4. Hold both sides of the front grille
and remove it by pulling up and
toward yourself gently.

Table of Contents

Other manuals for Panasonic CS-XE15WKUAW

Related product manuals