10
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may caused malfunction
and you may retrieve error code “H 99”. Please
consult authorised dealer.
• Switch off the power at the circuit breaker before
cleaning.
• Do not touch the aluminium fin, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 104 °F / 40 °C.
Indoor unit
Front panel
Wash gently and dry.
How to remove front panel
Raise over
horizontal
level
1
Pull upward
2
Horizontal
How to fix front panel
Hold horizontally
1
Match
2
Bend slightly and push to close.
3
Press both ends and center of the front panel.
4
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be cleaned
periodically by authorised dealer.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain
pipe.
Air filters
Once every 2 weeks
• Wash/rinse the filters gently with
water to avoid damage to the
filter surface.
• Dry the filters thoroughly under shade, away
from fire or direct sunlight.
• Replace any damaged filters.
Remove air filter Attach air filter
Insert into the unit
Front panel
Aluminium fin
Air filters
ACXF55-27111_FC1219-1.indb 10
ACXF55-27111_FC1219-1.indb 10
11/21/2019 2:56:52 PM
To Next Page
Loading...
